2" Insert Holder Medal-Antique Gold (Insert Not Included)
Item HR914G
$2.33 ea at volume, blank
plus $1.75 each to engrave
Zinc Alloy
2" Insert Holdler Medal-Antique Bronze (Insert Not Included)
2" Insert Holdler Medal-Antique Bronze (Insert Not Included) (item HR914B) is in our Insert Holder Medals range of Awards & Recognition, with a 1.65 in x 1.24 in personalization area. At 48 pieces it costs $5.50 each all-in: $3.00 for the piece plus $2.50 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.33
each at 500+ · $3.75 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $3.75 | - |
| 12-23 | $3.45 | save 8% |
| 24-47 | $3.23 | save 14% |
| 48-95 | $3.00 | save 20% |
| 96-249 | $2.78 | save 26% |
| 250-499 | $2.55 | save 32% |
| 500+ | $2.33 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.65in x 1.24in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the 2" Insert Holdler Medal-Antique Bronze (Insert Not Included)?
The 2" Insert Holdler Medal-Antique Bronze (Insert Not Included) is a medal built around Die-cast zinc alloy with a plated finish. It measures 2 3/4". This is the bronze colorway.
In practice: die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed. Plating then sets the finish. Gold, silver or bronze.
Medals scale to hundreds of recipients at a cost per person that no other award form matches. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess. The two together are why this item re-orders.
At this level the item is buying attention rather than gratitude. Order enough to be generous with it, because restraint here saves very little and costs reach. Concretely: $3.75 each at 1-11, $2.33 at 500+.
Specifications
| Item number | HR914B |
|---|---|
| Product type | Medal |
| Material | Zinc Alloy |
| Dimensions | 2 3/4" |
| Height | 2 3/4" |
| Shipping weight | 2 oz |
| Color | Bronze |
| Decoration methods | Die Struck, Printed Insert, Laser Engraving (back) |
| Standard imprint area | 1.65 in x 1.24 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. |
| Category | Awards & Recognition |
| Collection | Insert Holder Medals |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.65 in x 1.24 in.
Die Struck
The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal.
Best for
Medals, coins and lapel pins.
Color
Metal finish, optionally enamel-filled.
Printed Insert
A printed or sublimated disc is set into the recess of the piece. Full-color artwork inside a cast metal frame.
Best for
Medals and emblem holders where color is required.
Color
Full color.
Laser Engraving (back)
The reverse face is laser engraved. Personalization without disturbing the struck front face.
Best for
Medals with a standard front and individual backs.
Color
Substrate color.
Artwork requirements
- Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
- Convert all type to outlines so fonts do not substitute in production.
- A digital proof comes back to you first, every time. Production starts on your written approval and not before.
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- Supply Pantone (PMS) references for any color that has to match exactly.
Production schedule
| Artwork proof | 1 business day from receipt of usable art |
|---|---|
| Standard production | 3 to 5 business days after proof approval |
| Rush production | quoted per job, with the date confirmed in writing before you pay |
| Ground transit | 1 to 5 business days depending on destination |
Common uses
Races and tournamentsBuilt for races and tournaments. That is the use case the format was designed around, not one retrofitted to it.
School achievementWorks well for school achievement, where the medal format does what a printed handout cannot.
Participation recognitionWorks well for participation recognition, where the medal format does what a printed handout cannot.
Safety and quality milestonesMarking a record that took every person on the floor to achieve, with something they can point at.
Team and department awardsRecognizing a group without the cost or ceremony of individual crystal for every person.
Remote team welcome kitsShipped to a home address, which for a distributed team is the only physical touch the company gets.
Client thank-you programsSent after a renewal, a referral or a project close, when the relationship is warm and the gesture will land.
Service anniversariesFive, ten and twenty years. The object marks the span in a way a announcement never manages.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Recognition pieces for major donors and board members are the clearest win: they are relatively few, they are highly personal, and they materially affect renewal. For event merchandise, price the item to sell rather than to give. At $3.75 before breaks it is cheap enough to hand out without counting.
2
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. Awards are read as a hierarchy whether or not you intended one. If the participation piece and the champion piece look similar, the champion feels short-changed, and that is remembered longer than the result. Minimum order is a single piece, which suits how this segment tends to buy. The unit cost here is low enough that reach matters more than restraint.
3
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Medals scale to hundreds of recipients at a cost per person that no other award form matches. Order deep. At this price the waste of a few extra is cheaper than running short.
4
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess. Volume is the point at $3.75; nobody is auditing this line item.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free on every order, at any quantity |
| Freight | Orders over $250 ship free by ground; individual address splits available on request |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | Re-orders run from the file you already approved |
| Shipping | Orders over $250 ship free by ground; individual address splits available on request |
What do buyers ask about HR914B?
What happens if something arrives damaged?
We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.
How is this decorated?
Die Struck is the primary method on HR914B. The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal. We can also run Printed Insert and Laser Engraving (back) on this item if the artwork calls for it. The personalization area on HR914B is 1.65 in x 1.24 in.
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
Do you keep this item in stock?
Yes. The warehouse shows more than 1,000 of HR914B in stock as of the last hourly sync. If a color is short we say so the day you order rather than the week before the deadline. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
What does it actually cost at quantity?
The published ladder on HR914B runs from $3.75 a piece at 1-11 down to $2.33 at 500+, about 38% less per piece. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
Do you ship to multiple addresses?
Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.
Is there a setup charge?
No. Setup is free on every order at every quantity. Art preparation, machine setup and your digital proof are built into the price, with nothing added for them later. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
What is the minimum order for HR914B?
HR914B can be ordered from a single piece. The published ladder on HR914B runs from $3.75 a piece at 1-11 down to $2.33 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on HR914B is 1.65 in x 1.24 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of HR914B decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofPeople also considered
Same decision, different trade-off.
2" Insert Holder Medal-Antique Silver (Insert Not Included)
Item HR914S
$2.33 ea at volume, blank
plus $1.75 each to engrave
Half Wreath 2" Insert Holder Medal-Antique Bronze (Insert Not Included)
Item HR916B
$2.33 ea at volume, blank
plus $1.75 each to engrave
Half Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included)
Item HR916G
$2.33 ea at volume, blank
plus $1.75 each to engrave
Half Wreath 2" Insert Holder Medal-Antique Silver (Insert Not Included)
Item HR916S
$2.33 ea at volume, blank
plus $1.75 each to engrave
3-Star 2" Insert Holder Medal-Antique Bronze (Insert Not Included)
Item HR918B
$2.33 ea at volume, blank
plus $1.75 each to engrave
2" Insert Holdler Medal-Antique Bronze (Insert Not Included)Item HR914B · free proof, full refund until you approve
$2.33
What HR914B costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 48 | $3.00 | $2.50 | $5.50 | $264.00 | Free |
| 96 | $2.78 | $2.25 | $5.03 | $482.88 | Free |
| 250 | $2.55 | $2.00 | $4.55 | $1,137.50 | Free |
| 500 | $2.33 | $1.75 | $4.08 | $2,040.00 | Free |
- Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.65 in by 1.24 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 86% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 48 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 48.