1st Place Ten Star Medal (Gold only)
Item TS420G
$2.57 ea at volume, blank
plus $1.00 each to engrave
Zinc Alloy
2nd Place Ten Star Medal (Silver Only)
2nd Place Ten Star Medal (Silver Only) (item TS421S) is in our Place/Participant/Sportsmanship range of Awards & Recognition, with a 1.35 in x 1.01 in personalization area. At 48 pieces it costs $5.07 each all-in: $3.32 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.57
each at 500+ · $4.15 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $4.15 | - |
| 12-23 | $3.82 | save 8% |
| 24-47 | $3.57 | save 14% |
| 48-95 | $3.32 | save 20% |
| 96-249 | $3.07 | save 26% |
| 250-499 | $2.82 | save 32% |
| 500+ | $2.57 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.35in x 1.01in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the 2nd Place Ten Star Medal (Silver Only)?
Item TS421S is a medal in zinc alloy, chosen for how well it takes a mark and how long that mark lasts. It measures 2 1/4". This is the silver colorway.
Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed. Plating then sets the finish. Gold, silver or bronze. That is the difference between something kept and something replaced.
Medals scale to hundreds of recipients at a cost per person that no other award form matches. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess. The two together are why this item re-orders.
Treat this as reach inventory. The point of the tier is that you can put one in every hand at an event without the total ever becoming a conversation with finance. Concretely: $4.15 each at 1-11, $2.57 at 500+.
Specifications
| Item number | TS421S |
|---|---|
| Product type | Medal |
| Material | Zinc Alloy |
| Dimensions | 2 1/4" |
| Height | 2 1/4" |
| Shipping weight | 1 oz |
| Color | Silver |
| Decoration methods | Die Struck, Printed Insert, Laser Engraving (back) |
| Standard imprint area | 1.35 in x 1.01 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. |
| Category | Awards & Recognition |
| Collection | Place/Participant/Sportsmanship |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.35 in x 1.01 in.
Die Struck
The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal.
Best for
Medals, coins and lapel pins.
Color
Metal finish, optionally enamel-filled.
Printed Insert
A printed or sublimated disc is set into the recess of the piece. Full-color artwork inside a cast metal frame.
Best for
Medals and emblem holders where color is required.
Color
Full color.
Laser Engraving (back)
The reverse face is laser engraved. Personalization without disturbing the struck front face.
Best for
Medals with a standard front and individual backs.
Color
Substrate color.
Artwork requirements
- Artwork we redraw stays on file under your item number, so the next order runs from the same corrected file.
- Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
- Send vector if you have it. A .ai, .eps, .pdf or .svg scales to any imprint without softening.
- Convert all type to outlines so fonts do not substitute in production.
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
Production schedule
| Artwork proof | 1 business day from receipt of usable art |
|---|---|
| Standard production | 3 to 5 business days after proof approval |
| Rush production | quoted per job, with the date confirmed in writing before you pay |
| Ground transit | 1 to 5 business days depending on destination |
Common uses
Races and tournamentsBuilt for races and tournaments. That is the use case the format was designed around, not one retrofitted to it.
School achievementWorks well for school achievement, where the medal format does what a printed handout cannot.
Participation recognitionWorks well for participation recognition, where the medal format does what a printed handout cannot.
Safety and quality milestonesMarking a record that took every person on the floor to achieve, with something they can point at.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Team and department awardsRecognizing a group without the cost or ceremony of individual crystal for every person.
Event and conference giftingHanded to qualified conversations rather than to everyone, so the spend goes where the pipeline is.
Employee milestonesAnniversaries, promotions and retirements: the moments where a personalized object does what an email cannot.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Recognition pieces for major donors and board members are the clearest win: they are relatively few, they are highly personal, and they materially affect renewal. For event merchandise, price the item to sell rather than to give. An imprint area of 1.35 in x 1.01 in is enough for a logo and a line of text without crowding. At this price the risk is under-ordering, not over-ordering.
2
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. Awards are read as a hierarchy whether or not you intended one. If the participation piece and the champion piece look similar, the champion feels short-changed, and that is remembered longer than the result. Down to $2.57 at volume, which is where this stops being a cost.
3
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Buy for coverage. The arithmetic rewards it and the budget will not notice.
4
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Minimum order is a single piece, which suits how this segment tends to buy. At $4.15 before breaks it is cheap enough to hand out without counting.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free on every order, at any quantity |
| Freight | Orders over $250 ship free by ground; individual address splits available on request |
| Rush service | Rush is quoted per job, with the date confirmed in writing before payment |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | We keep the approved file, so a re-order reproduces it exactly |
| Shipping | Orders over $250 ship free by ground; individual address splits available on request |
What do buyers ask about TS421S?
Is there a setup charge?
There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
What happens if something arrives damaged?
We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.
What does it actually cost at quantity?
Most orders land near 48-95, which prices at $3.32 a piece. The published ladder on TS421S runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
What artwork do you need from me?
Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 1.35 in x 1.01 in personalization area and tell you before you pay whether it holds up at that size.
Can I mix colors or sizes to reach a quantity break?
Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on TS421S runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece.
How is this decorated?
Die Struck is the primary method on TS421S. The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal. We can also run Printed Insert and Laser Engraving (back) on this item if the artwork calls for it. The personalization area on TS421S is 1.35 in x 1.01 in.
How long does production take?
Door to door at standard speed: a day for the proof, 3 to 5 business days in production, then 1 to 5 business days in transit. A rush is quoted per job, with the date confirmed in writing before you pay.
What is the minimum order for TS421S?
There is no minimum beyond one piece on TS421S. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on TS421S runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece.
See it with your logo first
Send us your artwork and we will produce a free digital proof of TS421S decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofPeople also considered
Same decision, different trade-off.
3rd Place Ten Star Medal (Bronze Only)
Item TS422B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Participant Ten Star Medal-Bronze
Item TS510B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Participant Ten Star Medal-Gold
Item TS510G
$2.57 ea at volume, blank
plus $1.00 each to engrave
Participant Ten Star Medal-Silver
Item TS510S
$2.57 ea at volume, blank
plus $1.00 each to engrave
Participant 3-D Medal-Bronze
Item 3D306B
$2.79 ea at volume, blank
plus $1.00 each to engrave
2nd Place Ten Star Medal (Silver Only)Item TS421S · free proof, full refund until you approve
$2.57
What TS421S costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $3.82 | $3.75 | $7.57 | $90.84 | Priced by weight |
| 24 | $3.57 | $2.25 | $5.82 | $139.68 | Priced by weight |
| 48 | $3.32 | $1.75 | $5.07 | $243.36 | Priced by weight |
| 96 | $3.07 | $1.25 | $4.32 | $414.72 | Free |
| 250 | $2.82 | $1.00 | $3.82 | $955.00 | Free |
| 500 | $2.57 | $1.00 | $3.57 | $1,785.00 | Free |
- Ground freight is free from 96 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.35 in by 1.01 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 80% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.