6 oz. White/Black Laserable Leatherette Stainless Steel Flask
Item FSK631
$14.60 ea at volume, blank
plus $3.50 each to engrave
Other options in this range
Stainless Steel
6 oz
6 oz. Purple/Black Laserable Leatherette Stainless Steel Flask
6 oz. Purple/Black Laserable Leatherette Stainless Steel Flask (item FSK632) is in our Leatherette Plaques range of Awards & Recognition, with a 2.25 in x 2.75 in personalization area. At 48 pieces it costs $23.09 each all-in: $18.84 for the piece plus $4.25 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$14.60
each at 500+ · $23.55 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $23.55 | - |
| 12-23 | $21.67 | save 8% |
| 24-47 | $20.25 | save 14% |
| 48-95 | $18.84 | save 20% |
| 96-249 | $17.43 | save 26% |
| 250-499 | $16.01 | save 32% |
| 500+ | $14.60 | save 38% |
✓ 864 in stock
Last run: the mill is not
making more of this one, so what is in stock is what is left.
Clearance stock cannot be returned, so tell us what you are making and
we will check the fit before you buy.
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 10. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 2.25in x 2.75in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the 6 oz. Purple/Black Laserable Leatherette Stainless Steel Flask?
This is a plaque at 6 oz in stainless steel. Straightforward to decorate, and durable enough that the decoration outlasts the occasion. It measures 3 3/4"(L) x 4 1/4"(H) x 1"(W). This is the purple colorway, one of 2 in the range.
Worth knowing before you order: the vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. The outer wall never sweats, so it will not leave rings on a conference table or slip out of a hand on a job site.
Wall-mounted recognition stays visible to everyone who walks past, not just the recipient. The powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does.
This is the tier where an item stops being a giveaway and starts being a gift. Order it for people you have named rather than for a table, and the response rate changes accordingly. Concretely: $23.55 each at 1-11, $14.60 at 500+.
Specifications
| Item number | FSK632 |
|---|---|
| Product type | Plaque |
| Material | Stainless Steel |
| Capacity | 6 oz |
| Dimensions | 3 3/4"(L) x 4 1/4"(H) x 1"(W) |
| Shipping weight | 5 oz |
| Color | Purple, Black |
| Decoration methods | Laser Engraving, UV Printing, Color Fill |
| Standard imprint area | 2.25 in x 2.75 in |
| Minimum order | 1 piece |
| Durability | Very high: realistically a multi-year item. |
| Care | Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. |
| Category | Awards & Recognition |
| Collection | Leatherette Plaques |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 2.25 in x 2.75 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Color Fill
Engraved or carved recesses are filled with pigment. A permanent engraved mark that reads in brand color rather than substrate color.
Best for
Metal and crystal where the logo must be recognisably on-brand.
Color
Matched to Pantone where the recess allows.
Artwork requirements
- Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
- If brand color accuracy matters, give us the Pantone numbers rather than a screenshot to match.
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- Send the file you have, even if it is imperfect. We will tell you honestly whether it will hold up and redraw it if it will not.
- Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
Production schedule
| Artwork proof | 1 business day from receipt of usable art |
|---|---|
| Standard production | 3 to 5 business days after proof approval |
| Rush production | quoted per job, with the date confirmed in writing before you pay |
| Ground transit | 1 to 5 business days depending on destination |
Common uses
Service awardsBuilt for service awards. That is the use case the format was designed around, not one retrofitted to it.
Donor recognitionBuilt for donor recognition. That is the use case the format was designed around, not one retrofitted to it.
Sponsor and partner recognitionBuilt for sponsor and partner recognition. That is the use case the format was designed around, not one retrofitted to it.
Internal contests and incentivesA tangible prize outperforms a gift card for exactly the reason you would expect. It stays on the desk.
Executive and board giftingShort lists, individual personalization, and a piece that survives scrutiny.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Service anniversariesFive, ten and twenty years. The object marks the span in a way a announcement never manages.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Donors read the gift as a statement about stewardship. Something visibly expensive can cost you more in confidence than it earns in goodwill, which is why restraint and a personal inscription usually outperform scale in this sector. The gesture is the product here. Spend the thought, not just the budget.
2
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. At $23.55 before breaks, name the recipients rather than filling a table.
3
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. This reads as a gift. Give it to people you chose, not people who walked past.
4
Faith & Community Organizations
Faith communities give to mark moments rather than to advertise. These pieces are given once and kept for a lifetime, so the failure mode is not looking cheap but dating badly. Restrained typography and no year-specific styling means the piece still reads well in twenty years. Decoration holds up in this setting, which is where cheaper substrates fail. Worth personalising individually at this price; the response rate justifies it.
5
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. The order arrives before the results do, which means engraving strategy is the real decision. Generic plates with a separate engraved insert let you produce early and personalize late, and that is usually the difference between hitting the date and missing it. An imprint area of 2.25 in x 2.75 in is enough for a logo and a line of text without crowding. $23.55 before breaks puts this above hand-out territory. Use it that way.
6
Employee Recognition & Service Awards
Recognition fails when the object does not match the words. If you are marking five or ten years of someone's working life, the piece has to carry weight. Literally and otherwise. Personalization with the individual's name is what converts a company gift into a personal keepsake, and it is the single highest-leverage decision in a recognition program. Reserve this for the shortlist and the response changes noticeably.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight on every order over $250; split shipping to individual addresses available |
| Rush service | Rush is quoted per job, with the date confirmed in writing before payment |
| Proofing | Digital proof within 1 business day; production begins on written approval |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Free ground freight on every order over $250; split shipping to individual addresses available |
What do buyers ask about FSK632?
How is this decorated?
We run laser engraving on FSK632 as standard. A permanent, high-contrast, single-color mark with no ink involved. We can also run UV Printing and Color Fill on this item if the artwork calls for it. The personalization area on FSK632 is 2.25 in x 2.75 in. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
What does it actually cost at quantity?
Most orders land near 48-95, which prices at $18.84 a piece. The published ladder on FSK632 runs from $23.55 a piece at 1-11 down to $14.60 at 500+, about 38% less per piece. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
What if the artwork does not fit the imprint area?
The personalization area on FSK632 is 2.25 in x 2.75 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
Can I mix colors or sizes to reach a quantity break?
Yes. FSK632 runs in 2 colors and they combine for pricing, as long as the artwork does not change between them. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+.
What artwork do you need from me?
Send vector if it exists, raster at 300 dpi if it does not, and whatever you have if neither. The personalization area on FSK632 is 2.25 in x 2.75 in, and we redraw or re-proportion anything that will not survive it. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
Can I order more later and have them match?
Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on FSK632 runs from $23.55 a piece at 1-11 down to $14.60 at 500+, about 38% less per piece.
How long does production take?
Door to door at standard speed: a day for the proof, 3 to 5 business days in production, then 1 to 5 business days in transit. A rush is quoted per job, with the date confirmed in writing before you pay.
What is the minimum order for FSK632?
There is no minimum beyond one piece on FSK632. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on FSK632 runs from $23.55 a piece at 1-11 down to $14.60 at 500+, about 38% less per piece.
See it with your logo first
Send us your artwork and we will produce a free digital proof of FSK632 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
People also considered
Same decision, different trade-off.
Dark Brown Laserable Leatherette 2200 mAh Power Bank with USB Cord
Item GFT1137
$14.60 ea at volume, blank
plus $1.75 each to engrave
Black/Gold Laserable Leatherette 2200 mAh Power Bank with USB Cord
Item GFT1138
$14.60 ea at volume, blank
plus $1.75 each to engrave
Gray Laserable Leatherette 2200 mAh Power Bank with USB Cord
Item GFT1140
$14.60 ea at volume, blank
plus $1.75 each to engrave
Pink Laserable Leatherette 2200 mAh Power Bank with USB Cord
Item GFT1141
$14.60 ea at volume, blank
plus $1.75 each to engrave
Black/Silver Laserable Leatherette 2200 mAh Power Bank with USB Cord
Item GFT1142
$14.60 ea at volume, blank
plus $1.75 each to engrave
Rustic/Gold Laserable Leatherette 2200 mAh Power Bank with USB Cord
Item GFT1143
$14.60 ea at volume, blank
plus $1.75 each to engrave
6 oz. Purple/Black Laserable Leatherette Stainless Steel FlaskItem FSK632 · free proof, full refund until you approve
$14.60
What FSK632 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $21.67 | $6.25 | $27.92 | $335.04 | Free |
| 24 | $20.25 | $4.75 | $25.00 | $600.00 | Free |
| 48 | $18.84 | $4.25 | $23.09 | $1,108.32 | Free |
| 96 | $17.43 | $3.75 | $21.18 | $2,033.28 | Free |
| 250 | $16.01 | $3.50 | $19.51 | $4,877.50 | Free |
| 500 | $14.60 | $3.50 | $18.10 | $9,050.00 | Free |
- Ground freight is free from 12 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 2.25 in by 2.75 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 55% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.