Golf Ten Star Medal-Bronze
Item TS406B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Other options in this range
Zinc Alloy
Golf Ten Star Medal-Gold
Golf Ten Star Medal-Gold (item TS406G) is in our Golf range of Awards & Recognition, with a 1.35 in x 1.01 in personalization area. At 48 pieces it costs $5.07 each all-in: $3.32 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.57
each at 500+ · $4.15 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $4.15 | - |
| 12-23 | $3.82 | save 8% |
| 24-47 | $3.57 | save 14% |
| 48-95 | $3.32 | save 20% |
| 96-249 | $3.07 | save 26% |
| 250-499 | $2.82 | save 32% |
| 500+ | $2.57 | save 38% |
✓ 593 in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.35in x 1.01in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Golf Ten Star Medal-Gold?
The Golf Ten Star Medal-Gold is what most buyers mean when they ask for a medal that will not look cheap in six months. It measures 2 1/4". This is the gold colorway.
In practice: die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed. Plating then sets the finish. Gold, silver or bronze.
Medals scale to hundreds of recipients at a cost per person that no other award form matches. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess.
Treat this as reach inventory. The point of the tier is that you can put one in every hand at an event without the total ever becoming a conversation with finance. Concretely: $4.15 each at 1-11, $2.57 at 500+.
Specifications
| Item number | TS406G |
|---|---|
| Product type | Medal |
| Material | Zinc Alloy |
| Dimensions | 2 1/4" |
| Height | 2 1/4" |
| Shipping weight | 1 oz |
| Color | Gold |
| Decoration methods | Die Struck, Printed Insert, Laser Engraving (back) |
| Standard imprint area | 1.35 in x 1.01 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. |
| Category | Awards & Recognition |
| Collection | Golf |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.35 in x 1.01 in.
Die Struck
The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal.
Best for
Medals, coins and lapel pins.
Color
Metal finish, optionally enamel-filled.
Printed Insert
A printed or sublimated disc is set into the recess of the piece. Full-color artwork inside a cast metal frame.
Best for
Medals and emblem holders where color is required.
Color
Full color.
Laser Engraving (back)
The reverse face is laser engraved. Personalization without disturbing the struck front face.
Best for
Medals with a standard front and individual backs.
Color
Substrate color.
Artwork requirements
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
- A digital proof comes back to you first, every time. Production starts on your written approval and not before.
- Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
- Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
Production schedule
| Proof to you | Within one business day of usable artwork arriving |
|---|---|
| Production, standard | 3 to 5 business days, counted from your approval |
| Production, rush | quoted per job, confirmed in writing before you pay |
| Transit by ground | 1 to 5 business days, by distance from the shipping point |
Common uses
Races and tournamentsBuilt for races and tournaments. That is the use case the format was designed around, not one retrofitted to it.
School achievementSpecified regularly for school achievement. The imprint area at 1.35 in x 1.01 in is sized for exactly that job.
Participation recognitionParticipation recognition is where this earns its cost, and where buyers re-order it.
Recruiting and onboardingIncluded in offer packs and first-day kits, where the object is doing culture work from the very first hour.
Remote team welcome kitsShipped to a home address, which for a distributed team is the only physical touch the company gets.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Team and department awardsRecognizing a group without the cost or ceremony of individual crystal for every person.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. Awards are read as a hierarchy whether or not you intended one. If the participation piece and the champion piece look similar, the champion feels short-changed, and that is remembered longer than the result. Minimum order is a single piece, which suits how this segment tends to buy. Order deep. At this price the waste of a few extra is cheaper than running short.
2
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Medals scale to hundreds of recipients at a cost per person that no other award form matches. Volume is the point at $4.15; nobody is auditing this line item.
3
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess. Cost per impression is the number that matters here, and it is very low.
4
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Donors read the gift as a statement about stewardship. Something visibly expensive can cost you more in confidence than it earns in goodwill, which is why restraint and a personal inscription usually outperform scale in this sector. The medal format earns its place here on keep-rate rather than headline price. Cheap enough to over-order slightly, which is the right call for a table.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Orders over $250 ship free by ground; individual address splits available on request |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Digital proof within 1 business day; production begins on written approval |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Orders over $250 ship free by ground; individual address splits available on request |
What do buyers ask about TS406G?
How is this decorated?
Die Struck is the primary method on TS406G. The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal. We can also run Printed Insert and Laser Engraving (back) on this item if the artwork calls for it. The personalization area on TS406G is 1.35 in x 1.01 in.
Do you keep this item in stock?
Yes. The warehouse shows 593 of TS406G in stock as of the last hourly sync. If a color is short we say so the day you order rather than the week before the deadline. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
What happens if something arrives damaged?
Tell us within 10 days of delivery and we replace it. Note any damage on the freight bill before you sign for it, because that is what the carrier claim turns on. Resolving it with the carrier is our job, not yours. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Can I order more later and have them match?
Re-orders reproduce rather than reinterpret. We keep the approved artwork on file against the item number, so a re-order runs from the same file. On natural materials the base itself can shift a little between batches, so tell us if an exact match matters. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
Is there a setup charge?
No. Setup is free on every order at every quantity. Art preparation, machine setup and your digital proof are built into the price, with nothing added for them later. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
What does it actually cost at quantity?
The published ladder on TS406G runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
What is the minimum order for TS406G?
TS406G can be ordered from a single piece. The published ladder on TS406G runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on TS406G is 1.35 in x 1.01 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of TS406G decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
People also considered
Same decision, different trade-off.
Golf Galaxy Medal-Bronze
Item GM105B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Golf Galaxy Medal-Gold
Item GM105G
$2.57 ea at volume, blank
plus $1.00 each to engrave
Golf Galaxy Medal-Silver
Item GM105S
$2.57 ea at volume, blank
plus $1.00 each to engrave
Golf 3-D Medal-Bronze
Item 3D207B
$2.79 ea at volume, blank
plus $1.00 each to engrave
Golf 3-D Medal-Gold
Item 3D207G
$2.79 ea at volume, blank
plus $1.00 each to engrave
Golf 3-D Medal-Silver
Item 3D207S
$2.79 ea at volume, blank
plus $1.00 each to engrave
Golf Ten Star Medal-GoldItem TS406G · free proof, full refund until you approve
$2.57
What TS406G costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $3.82 | $3.75 | $7.57 | $90.84 | Priced by weight |
| 24 | $3.57 | $2.25 | $5.82 | $139.68 | Priced by weight |
| 48 | $3.32 | $1.75 | $5.07 | $243.36 | Priced by weight |
| 96 | $3.07 | $1.25 | $4.32 | $414.72 | Free |
| 250 | $2.82 | $1.00 | $3.82 | $955.00 | Free |
| 500 | $2.57 | $1.00 | $3.57 | $1,785.00 | Free |
- Ground freight is free from 96 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.35 in by 1.01 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 80% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.