Light Brown Leatherette Hard Business Card Holder
Item GFT183
$8.83 ea at volume, blank
plus $1.75 each to engrave
Other options in this range
Leatherette
Gray Leatherette Hard Business Card Holder
Gray Leatherette Hard Business Card Holder (item GFT372) is in our Phone Wallets & Holders range of Corporate Awards, with a 2.25 in x 1.38 in personalization area. At 48 pieces it costs $13.90 each all-in: $11.40 for the piece plus $2.50 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$8.83
each at 500+ · $14.25 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $14.25 | - |
| 12-23 | $13.11 | save 8% |
| 24-47 | $12.26 | save 14% |
| 48-95 | $11.40 | save 20% |
| 96-249 | $10.55 | save 26% |
| 250-499 | $9.69 | save 32% |
| 500+ | $8.83 | save 38% |
✓ 705 in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 10. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 2.25in x 1.38in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Gray Leatherette Hard Business Card Holder?
Item GFT372 is a phone accessory in leatherette, chosen for how well it takes a mark and how long that mark lasts. It measures 3 3/4" x 2 3/4". This is the gray colorway.
Leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges. That is the difference between something kept and something replaced.
It attaches to the one object a person touches more than any other, and it stays there. On this substrate specifically: this is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off.
The middle of the range, and the part of it that does the most work. Good enough that people keep it, cheap enough that you can cover an entire department. Concretely: $14.25 each at 1-11, $8.83 at 500+.
Specifications
| Item number | GFT372 |
|---|---|
| Product type | Phone Accessory |
| Material | Leatherette |
| Dimensions | 3 3/4" x 2 3/4" |
| Shipping weight | 1 oz |
| Color | Gray |
| Decoration methods | Laser Engraving, Debossing, UV Printing |
| Standard imprint area | 2.25 in x 1.38 in |
| Minimum order | 1 piece |
| Durability | High for everyday carry. |
| Care | Wipe clean with a damp cloth. Do not soak or machine wash. |
| Category | Corporate Awards |
| Collection | Phone Wallets & Holders |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 2.25 in x 1.38 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
Debossing
A heated die presses the artwork into the material. A subtle, tactile, recessed impression in the surface color.
Best for
Leather and leatherette gifts where understatement is the point.
Color
Blind (no color) or foil-filled.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Artwork requirements
- Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
- Type should be converted to curves or outlines, otherwise a missing font silently substitutes on our end.
- Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
- Send vector if you have it. A .ai, .eps, .pdf or .svg scales to any imprint without softening.
- If the logo is only available as a bitmap, we need it at 300 dpi or better at final size, ideally on a transparent background.
Production schedule
| Artwork proof | 1 business day from receipt of usable art |
|---|---|
| Standard production | 3 to 5 business days after proof approval |
| Rush production | quoted per job, with the date confirmed in writing before you pay |
| Ground transit | 1 to 5 business days depending on destination |
Common uses
Trade show handoutsWorks well for trade show handouts, where the phone accessory format does what a printed handout cannot.
Campus and student programsA natural fit for campus and student programs, which is one of the settings this phone accessory was specified for.
Customer onboarding kitsA natural fit for customer onboarding kits, which is one of the settings this phone accessory was specified for.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Recruiting and onboardingIncluded in offer packs and first-day kits, where the object is doing culture work from the very first hour.
Executive and board giftingShort lists, individual personalization, and a piece that survives scrutiny.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Technology, SaaS & Startups
Distributed teams have no office to carry the culture, so the objects have to. Shipping a considered kit to a home address is now a standard part of remote onboarding, and it is the rare marketing spend that shows up in retention numbers. Ship-safe materials matter more here than in any other segment. Decoration holds up in this setting, which is where cheaper substrates fail. Priced so you can cover everyone without cheapening the gesture.
2
Trade Shows & Conferences
Booth traffic is not the metric: what leaves the hall and stays in use is. Weight and packability decide what actually leaves the hall. Anything bulky ends up in a hotel bin regardless of quality, so the constraint is what fits in a carry-on alongside everything else collected that day. An imprint area of 2.25 in x 1.38 in is enough for a logo and a line of text without crowding. At $8.83 in volume the cost per kept item is hard to beat.
3
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Roughly 38% comes off between one piece and a full run.
4
Onboarding & New Hire Kits
Day one sets the tone for everything after it. A welcome kit waiting on a desk, or arriving at a home address before a remote start, is the cheapest culture signal an employer can buy. Items that get used daily do the most work here, because they keep signalling belonging long after week one. At $14.25 before breaks this is the tier most programmes should live in.
5
Automotive & Dealerships
Delivery day is the highest-emotion moment in the customer relationship. Service and sales want opposite things from the same budget. Sales needs a handful of pieces with real presence for delivery day; service needs high frequency at low cost. Splitting the budget explicitly stops one cannibalizing the other. Minimum order is a single piece, which suits how this segment tends to buy. Good enough to be kept, affordable enough to order in real quantity.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Rush available: tell us the date and we confirm it in writing before you pay |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about GFT372?
How is this decorated?
We run laser engraving on GFT372 as standard. A permanent, high-contrast, single-color mark with no ink involved. We can also run Debossing and UV Printing on this item if the artwork calls for it. The personalization area on GFT372 is 2.25 in x 1.38 in. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
Can I get a sample before committing?
Yes: order one piece. GFT372 sells from a single unit at $14.25, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.
Can I order more later and have them match?
Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on GFT372 runs from $14.25 a piece at 1-11 down to $8.83 at 500+, about 38% less per piece.
What artwork do you need from me?
Send vector if it exists, raster at 300 dpi if it does not, and whatever you have if neither. The personalization area on GFT372 is 2.25 in x 1.38 in, and we redraw or re-proportion anything that will not survive it. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
Do you keep this item in stock?
Yes. The warehouse shows 705 of GFT372 in stock as of the last hourly sync. If a color is short we say so the day you order rather than the week before the deadline. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
How should this be cared for?
Wipe clean with a damp cloth. Do not soak or machine wash. GFT372 measures 3 3/4" x 2 3/4" and is made of leatherette. Leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges.
What if the artwork does not fit the imprint area?
The personalization area on GFT372 is 2.25 in x 1.38 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
What is the minimum order for GFT372?
GFT372 can be ordered from a single piece. The published ladder on GFT372 runs from $14.25 a piece at 1-11 down to $8.83 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on GFT372 is 2.25 in x 1.38 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of GFT372 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
Dark Brown Leatherette Hard Business Card Holder
Item GFT184
$8.83 ea at volume, blank
plus $1.75 each to engrave
Black/Gold Leatherette Hard Business Card Holder
Item GFT245A
$8.83 ea at volume, blank
plus $1.75 each to engrave
Rawhide Leatherette Hard Business Card Holder
Item GFT266
$8.83 ea at volume, blank
plus $1.75 each to engrave
Pink Leatherette Hard Business Card Holder
Item GFT419
$8.83 ea at volume, blank
plus $1.75 each to engrave
Black/Silver Leatherette Hard Business Card Holder
Item GFT606
$8.83 ea at volume, blank
plus $1.75 each to engrave
Rustic/Gold Leatherette Hard Business Card Holder
Item GFT705
$8.83 ea at volume, blank
plus $1.75 each to engrave
Teal Leatherette Hard Business Card Holder
Item GFT804
$8.83 ea at volume, blank
plus $1.75 each to engrave
People also considered
Same decision, different trade-off.
Blue/Silver Laserable Leatherette Phone Wallet with Silver Ring
Item GFT1130
$8.83 ea at volume, blank
plus $1.75 each to engrave
Teal Leatherette Cell Phone Wallet with Silver Ring
Item GFT1131
$8.83 ea at volume, blank
plus $1.75 each to engrave
Red Laserable Leatherette Hard Business Card Holder
Item GFT904
$8.83 ea at volume, blank
plus $1.75 each to engrave
Light Brown Laserable Leatherette Phone Wallet
Item GFT520
$7.60 ea at volume, blank
plus $1.75 each to engrave
Dark Brown Laserable Leatherette Phone Wallet
Item GFT521
$7.60 ea at volume, blank
plus $1.75 each to engrave
Black/Gold Laserable Leatherette Phone Wallet
Item GFT522A
$7.60 ea at volume, blank
plus $1.75 each to engrave
Gray Leatherette Hard Business Card HolderItem GFT372 · free proof, full refund until you approve
$8.83
What GFT372 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $13.11 | $4.50 | $17.61 | $211.32 | Priced by weight |
| 24 | $12.26 | $3.25 | $15.51 | $372.24 | Free |
| 48 | $11.40 | $2.50 | $13.90 | $667.20 | Free |
| 96 | $10.55 | $2.25 | $12.80 | $1,228.80 | Free |
| 250 | $9.69 | $2.00 | $11.69 | $2,922.50 | Free |
| 500 | $8.83 | $1.75 | $10.58 | $5,290.00 | Free |
- Ground freight is free from 24 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 2.25 in by 1.38 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 73% of the 405 other priced items in Corporate Awards.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.