Lamp of Knowledge Ten Star Medal-Gold
Item TS506G
$2.57 ea at volume, blank
plus $1.00 each to engrave
Other options in this range
Zinc Alloy
Lamp of Knowledge Ten Star Medal-Bronze
Lamp of Knowledge Ten Star Medal-Bronze (item TS506B) is in our Lamp of Knowledge/Graduate range of Awards & Recognition, with a 1.35 in x 1.01 in personalization area. At 48 pieces it costs $5.07 each all-in: $3.32 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.57
each at 500+ · $4.15 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $4.15 | - |
| 12-23 | $3.82 | save 8% |
| 24-47 | $3.57 | save 14% |
| 48-95 | $3.32 | save 20% |
| 96-249 | $3.07 | save 26% |
| 250-499 | $2.82 | save 32% |
| 500+ | $2.57 | save 38% |
✓ 871 in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.35in x 1.01in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Lamp of Knowledge Ten Star Medal-Bronze?
Item TS506B is a medal in zinc alloy, chosen for how well it takes a mark and how long that mark lasts. It measures 2 1/4". This is the bronze colorway.
Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed. Plating then sets the finish. Gold, silver or bronze.
Medals scale to hundreds of recipients at a cost per person that no other award form matches. On this substrate specifically: artwork is struck into the die, or applied as a printed or sublimated insert set into the recess.
Giveaway pricing, which changes how you should think about quantity. Running short at a booth costs more in missed conversations than the extra units would have cost to print. Concretely: $4.15 each at 1-11, $2.57 at 500+.
Specifications
| Item number | TS506B |
|---|---|
| Product type | Medal |
| Material | Zinc Alloy |
| Dimensions | 2 1/4" |
| Height | 2 1/4" |
| Shipping weight | 1 oz |
| Color | Bronze |
| Decoration methods | Die Struck, Printed Insert, Laser Engraving (back) |
| Standard imprint area | 1.35 in x 1.01 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. |
| Category | Awards & Recognition |
| Collection | Lamp of Knowledge/Graduate |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.35 in x 1.01 in.
Die Struck
The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal.
Best for
Medals, coins and lapel pins.
Color
Metal finish, optionally enamel-filled.
Printed Insert
A printed or sublimated disc is set into the recess of the piece. Full-color artwork inside a cast metal frame.
Best for
Medals and emblem holders where color is required.
Color
Full color.
Laser Engraving (back)
The reverse face is laser engraved. Personalization without disturbing the struck front face.
Best for
Medals with a standard front and individual backs.
Color
Substrate color.
Artwork requirements
- Type should be converted to curves or outlines, otherwise a missing font silently substitutes on our end.
- Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
- Convert all type to outlines so fonts do not substitute in production.
- Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
- Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
Production schedule
| Artwork proof | 1 business day from receipt of usable art |
|---|---|
| Standard production | 3 to 5 business days after proof approval |
| Rush production | quoted per job, with the date confirmed in writing before you pay |
| Ground transit | 1 to 5 business days depending on destination |
Common uses
Races and tournamentsBuilt for races and tournaments. That is the use case the format was designed around, not one retrofitted to it.
School achievementA natural fit for school achievement, which is one of the settings this medal was specified for.
Participation recognitionWorks well for participation recognition, where the medal format does what a printed handout cannot.
Team and department awardsRecognizing a group without the cost or ceremony of individual crystal for every person.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Employee milestonesAnniversaries, promotions and retirements: the moments where a personalized object does what an email cannot.
Recruiting and onboardingIncluded in offer packs and first-day kits, where the object is doing culture work from the very first hour.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Recognition pieces for major donors and board members are the clearest win: they are relatively few, they are highly personal, and they materially affect renewal. For event merchandise, price the item to sell rather than to give. Decoration holds up in this setting, which is where cheaper substrates fail. Order deep. At this price the waste of a few extra is cheaper than running short.
2
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. Awards are read as a hierarchy whether or not you intended one. If the participation piece and the champion piece look similar, the champion feels short-changed, and that is remembered longer than the result. An imprint area of 1.35 in x 1.01 in is enough for a logo and a line of text without crowding. Volume is the point at $4.15; nobody is auditing this line item.
3
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Cost per impression is the number that matters here, and it is very low.
4
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Cheap enough to over-order slightly, which is the right call for a table.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Digital proof within 1 business day; production begins on written approval |
| Re-orders | We keep the approved file, so a re-order reproduces it exactly |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about TS506B?
What does it actually cost at quantity?
The published ladder on TS506B runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
Can I order more later and have them match?
Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on TS506B runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece.
Can I mix colors or sizes to reach a quantity break?
Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on TS506B runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece.
How should this be cared for?
Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. TS506B measures 2 1/4" and is made of zinc alloy. Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed.
What if the artwork does not fit the imprint area?
The personalization area on TS506B is 1.35 in x 1.01 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
Can I get a sample before committing?
Yes: order one piece. TS506B sells from a single unit at $4.15, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.
Is there a setup charge?
There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
What is the minimum order for TS506B?
TS506B can be ordered from a single piece. The published ladder on TS506B runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on TS506B is 1.35 in x 1.01 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of TS506B decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
People also considered
Same decision, different trade-off.
Lamp of Knowledge Galaxy Medal-Bronze
Item GM107B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Lamp of Knowledge Galaxy Medal-Gold
Item GM107G
$2.57 ea at volume, blank
plus $1.00 each to engrave
Lamp of Knowledge Galaxy Medal-Silver
Item GM107S
$2.57 ea at volume, blank
plus $1.00 each to engrave
Graduate Ten Star Medal-Bronze
Item TS504B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Graduate Ten Star Medal-Gold
Item TS504G
$2.57 ea at volume, blank
plus $1.00 each to engrave
Graduate Ten Star Medal-Silver
Item TS504S
$2.57 ea at volume, blank
plus $1.00 each to engrave
Lamp of Knowledge Ten Star Medal-BronzeItem TS506B · free proof, full refund until you approve
$2.57
What TS506B costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $3.82 | $3.75 | $7.57 | $90.84 | Priced by weight |
| 24 | $3.57 | $2.25 | $5.82 | $139.68 | Priced by weight |
| 48 | $3.32 | $1.75 | $5.07 | $243.36 | Priced by weight |
| 96 | $3.07 | $1.25 | $4.32 | $414.72 | Free |
| 250 | $2.82 | $1.00 | $3.82 | $955.00 | Free |
| 500 | $2.57 | $1.00 | $3.57 | $1,785.00 | Free |
- Ground freight is free from 96 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.35 in by 1.01 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 80% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.