
Light Brown Laserable Leatherette Phone Wallet with Silver Ring
Light Brown Laserable Leatherette Phone Wallet with Silver Ring (item GFT1121) is in our Leatherette Plaques range of Awards & Recognition, with a 1 in x 1.63 in personalization area. At 48 pieces it costs $10.51 each all-in: $8.76 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $10.95 | - |
| 12-23 | $10.07 | save 8% |
| 24-47 | $9.42 | save 14% |
| 48-95 | $8.76 | save 20% |
| 96-249 | $8.10 | save 26% |
| 250-499 | $7.45 | save 32% |
| 500+ | $6.79 | save 38% |
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1in x 1.63in.
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
What is the Light Brown Laserable Leatherette Phone Wallet with Silver Ring?
The Light Brown Laserable Leatherette Phone Wallet with Silver Ring is a plaque built around Laserable polyurethane leatherette bonded to a contrasting core. It measures 2 3/8" x 3 1/8". This is the light brown colorway, one of 2 in the range.
Leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges. That is the difference between something kept and something replaced.
Wall-mounted recognition stays visible to everyone who walks past, not just the recipient. This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off.
Programs that run year after year usually settle at this tier. It clears the quality bar that decides whether something is kept, without the per-unit cost that forces a shorter list. Concretely: $10.95 each at 1-11, $6.79 at 500+.
Specifications
| Item number | GFT1121 |
|---|---|
| Product type | Plaque |
| Material | Leatherette |
| Dimensions | 2 3/8" x 3 1/8" |
| Shipping weight | 1 oz |
| Color | Light Brown, Silver |
| Decoration methods | Laser Engraving, Debossing, UV Printing |
| Standard imprint area | 1 in x 1.63 in |
| Minimum order | 1 piece |
| Durability | High for everyday carry. |
| Care | Wipe clean with a damp cloth. Do not soak or machine wash. |
| Category | Awards & Recognition |
| Collection | Leatherette Plaques |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1 in x 1.63 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Single color: the natural color of the material under the surface.
Debossing
A heated die presses the artwork into the material. A subtle, tactile, recessed impression in the surface color.
Leather and leatherette gifts where understatement is the point.
Blind (no color) or foil-filled.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Multi-color logos, gradients, photographs and exact brand-color matching.
Full color, including white ink on dark substrates.
Artwork requirements
- Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
- Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
- Convert all type to outlines so fonts do not substitute in production.
- Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
- Supply Pantone (PMS) references for any color that has to match exactly.
- Send the file you have, even if it is imperfect. We will tell you honestly whether it will hold up and redraw it if it will not.
Production schedule
| Digital proof | Same or next business day |
|---|---|
| Standard run | 3 to 5 business days once the proof is signed off |
| Rush run | quoted per job once the proof is signed off, with the date confirmed in writing |
| Delivery | 1 to 5 business days on the ground network |
Common uses
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
Employee Recognition & Service Awards
Recognition fails when the object does not match the words. If you are marking five or ten years of someone's working life, the piece has to carry weight. Literally and otherwise. Personalization with the individual's name is what converts a company gift into a personal keepsake, and it is the single highest-leverage decision in a recognition program. Wall-mounted recognition stays visible to everyone who walks past, not just the recipient. The workhorse choice for this audience, and it re-orders predictably.
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Donors read the gift as a statement about stewardship. Something visibly expensive can cost you more in confidence than it earns in goodwill, which is why restraint and a personal inscription usually outperform scale in this sector. This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off. Priced so you can cover everyone without cheapening the gesture.
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. The plaque format earns its place here on keep-rate rather than headline price. At $6.79 in volume the cost per kept item is hard to beat.
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Roughly 38% comes off between one piece and a full run.
Faith & Community Organizations
Faith communities give to mark moments rather than to advertise. These pieces are given once and kept for a lifetime, so the failure mode is not looking cheap but dating badly. Restrained typography and no year-specific styling means the piece still reads well in twenty years. Leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges.. At $10.95 before breaks this is the tier most programmes should live in.
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. The order arrives before the results do, which means engraving strategy is the real decision. Generic plates with a separate engraved insert let you produce early and personalize late, and that is usually the difference between hitting the date and missing it. Good enough to be kept, affordable enough to order in real quantity.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free, from one piece to five hundred |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Rush is quoted per job, with the date confirmed in writing before payment |
| Proofing | One business day to proof, then production starts the moment you sign off |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about GFT1121?
How long does production take?
Door to door at standard speed: a day for the proof, 3 to 5 business days in production, then 1 to 5 business days in transit. A rush is quoted per job, with the date confirmed in writing before you pay.
What if the artwork does not fit the imprint area?
The personalization area on GFT1121 is 1 in x 1.63 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
Do you keep this item in stock?
Yes. The warehouse shows 221 of GFT1121 in stock as of the last hourly sync. If a color is short we say so the day you order rather than the week before the deadline. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
How is this decorated?
We run laser engraving on GFT1121 as standard. A permanent, high-contrast, single-color mark with no ink involved. We can also run Debossing and UV Printing on this item if the artwork calls for it. The personalization area on GFT1121 is 1 in x 1.63 in. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
What happens if something arrives damaged?
We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Can I see a proof before you produce the order?
Always, and we do not start without written approval. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. Once approved, the proof becomes the specification for the run, so check the spelling and the placement carefully. The personalization area on GFT1121 is 1 in x 1.63 in.
What does it actually cost at quantity?
Most orders land near 48-95, which prices at $8.76 a piece. The published ladder on GFT1121 runs from $10.95 a piece at 1-11 down to $6.79 at 500+, about 38% less per piece. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
What is the minimum order for GFT1121?
There is no minimum beyond one piece on GFT1121. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on GFT1121 runs from $10.95 a piece at 1-11 down to $6.79 at 500+, about 38% less per piece.
See it with your logo first
Send us your artwork and we will produce a free digital proof of GFT1121 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range







People also considered
Same decision, different trade-off.






What GFT1121 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $10.07 | $3.75 | $13.82 | $165.84 | Priced by weight |
| 24 | $9.42 | $2.25 | $11.67 | $280.08 | Free |
| 48 | $8.76 | $1.75 | $10.51 | $504.48 | Free |
| 96 | $8.10 | $1.25 | $9.35 | $897.60 | Free |
| 250 | $7.45 | $1.00 | $8.45 | $2,112.50 | Free |
| 500 | $6.79 | $1.00 | $7.79 | $3,895.00 | Free |
- Ground freight is free from 24 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1 in by 1.63 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 68% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.




