1 oz. Stainless Steel Flask Keychain
Item FSK101
$5.58 ea at volume, blank
plus $1.75 each to engrave
Stainless Steel
Metal Funnel for Filling Flasks
Metal Funnel for Filling Flasks (item FNL01) is in our Stainless Steel Flasks and Keychains range of Personalized Gifts, with a 1.6 in x 1.31 in personalization area. The piece is $2.30 at 1-11 and $1.43 at 500+; engraving is priced on your artwork. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$1.43
each at 500+ · $2.30 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $2.30 | - |
| 12-23 | $2.12 | save 8% |
| 24-47 | $1.98 | save 14% |
| 48-95 | $1.84 | save 20% |
| 96-249 | $1.70 | save 26% |
| 250-499 | $1.56 | save 32% |
| 500+ | $1.43 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 10. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.6in x 1.31in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Metal Funnel for Filling Flasks?
A working keychain. 18/8 food-grade stainless steel with a double-wall vacuum-insulated construction and a powder-coated exterior. It measures 1 7/8".
Worth knowing before you order: the vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. The outer wall never sweats, so it will not leave rings on a conference table or slip out of a hand on a job site.
A keychain is handled several times a day, every day, for years. On this substrate specifically: the powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does.
This sits in the giveaway tier, where the job is reach: enough units to hand one to everyone who walks past the table, at a cost per impression low enough that nobody has to justify it line by line. Concretely: $2.30 each at 1-11, $1.43 at 500+.
Specifications
| Item number | FNL01 |
|---|---|
| Product type | Keychain |
| Material | Stainless Steel |
| Dimensions | 1 7/8" |
| Height | 1 7/8" |
| Shipping weight | 0 oz |
| Color | Silver |
| Decoration methods | Laser Engraving, UV Printing, Color Fill |
| Standard imprint area | 1.6 in x 1.31 in |
| Minimum order | 1 piece |
| Durability | Very high: realistically a multi-year item. |
| Care | Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. |
| Category | Personalized Gifts |
| Collection | Stainless Steel Flasks and Keychains |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.6 in x 1.31 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Color Fill
Engraved or carved recesses are filled with pigment. A permanent engraved mark that reads in brand color rather than substrate color.
Best for
Metal and crystal where the logo must be recognisably on-brand.
Color
Matched to Pantone where the recess allows.
Artwork requirements
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.
- Supply Pantone (PMS) references for any color that has to match exactly.
- We send a digital proof for written approval before production starts. Nothing goes on a machine until you sign it off.
- Send the file you have, even if it is imperfect. We will tell you honestly whether it will hold up and redraw it if it will not.
Production schedule
| Artwork proof | 1 business day from receipt of usable art |
|---|---|
| Standard production | 3 to 5 business days after proof approval |
| Rush production | quoted per job, with the date confirmed in writing before you pay |
| Ground transit | 1 to 5 business days depending on destination |
Common uses
Dealership and property handoverWorks well for dealership and property handover, where the keychain format does what a printed handout cannot.
EventsA natural fit for events, which is one of the settings this keychain was specified for.
MembershipBuilt for membership. That is the use case the format was designed around, not one retrofitted to it.
Employee milestonesAnniversaries, promotions and retirements: the moments where a personalized object does what an email cannot.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Service anniversariesFive, ten and twenty years. The object marks the span in a way a announcement never manages.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Real Estate & Closing Gifts
A closing gift is a referral instrument, not a thank-you note. The right gift stays in the new home, gets used in front of guests, and prompts the question "where did you get that?". That is the moment your name comes up. Personalizing with the family name rather than the brokerage logo dramatically increases the odds it stays out on display. Volume is the point at $2.30; nobody is auditing this line item.
2
Trade Shows & Conferences
Booth traffic is not the metric: what leaves the hall and stays in use is. Weight and packability decide what actually leaves the hall. Anything bulky ends up in a hotel bin regardless of quality, so the constraint is what fits in a carry-on alongside everything else collected that day. Cost per impression is the number that matters here, and it is very low.
3
Franchise & Multi-Location Brands
The hard problem in multi-location branding is consistency, not creativity. Artwork drift is cumulative and invisible until it is severe. A locked file held centrally against each item number, rather than a logo emailed between locations, is what stops forty sites gradually producing forty logos. Minimum order is a single piece, which suits how this segment tends to buy. Cheap enough to over-order slightly, which is the right call for a table.
4
Weddings, Reunions & Milestone Events
Personal events are the one segment where the recipient genuinely wants the item personalized. Names, dates and short inscriptions turn an ordinary object into something kept for decades. Quantities are modest and lead times are unforgiving, which makes production scheduling the thing to get right. A keychain is handled several times a day, every day, for years. At this price the risk is under-ordering, not over-ordering.
5
Automotive & Dealerships
Delivery day is the highest-emotion moment in the customer relationship. Service and sales want opposite things from the same budget. Sales needs a handful of pieces with real presence for delivery day; service needs high frequency at low cost. Splitting the budget explicitly stops one cannibalizing the other. The powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does. Down to $1.43 at volume, which is where this stops being a cost.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free, from one piece to five hundred |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | One business day to proof, then production starts the moment you sign off |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about FNL01?
What artwork do you need from me?
Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 1.6 in x 1.31 in personalization area and tell you before you pay whether it holds up at that size.
Can I get a sample before committing?
Yes: order one piece. FNL01 sells from a single unit at $2.30, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.
Can I see a proof before you produce the order?
Always, and we do not start without written approval. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. Once approved, the proof becomes the specification for the run, so check the spelling and the placement carefully. The personalization area on FNL01 is 1.6 in x 1.31 in.
What happens if something arrives damaged?
Tell us within 10 days of delivery and we replace it. Note any damage on the freight bill before you sign for it, because that is what the carrier claim turns on. Resolving it with the carrier is our job, not yours. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Do you keep this item in stock?
Yes. The warehouse shows more than 1,000 of FNL01 in stock as of the last hourly sync. If a color is short we say so the day you order rather than the week before the deadline. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
How should this be cared for?
Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. FNL01 measures 1 7/8" and is made of stainless steel. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level.
Do you ship to multiple addresses?
Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.
What is the minimum order for FNL01?
There is no minimum beyond one piece on FNL01. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on FNL01 runs from $2.30 a piece at 1-11 down to $1.43 at 500+, about 38% less per piece.
See it with your logo first
Send us your artwork and we will produce a free digital proof of FNL01 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofPeople also considered
Same decision, different trade-off.
1 oz. Matte Black Stainless Steel Flask Keychain
Item FSK102
$5.58 ea at volume, blank
plus $1.75 each to engrave
1 oz. Gloss Red Stainless Steel Flask Keychain
Item FSK103
$5.58 ea at volume, blank
plus $1.75 each to engrave
1 oz. Gloss Blue Stainless Steel Flask Keychain
Item FSK104
$5.58 ea at volume, blank
plus $1.75 each to engrave
1 oz. Matte Pink Stainless Steel Flask Keychain
Item FSK111
$5.58 ea at volume, blank
plus $1.75 each to engrave
Gloss White Aluminum Rectangle Keychain
Item UV109
$1.56 ea at volume, blank
plus $1.00 each to engrave
Metal Funnel for Filling FlasksItem FNL01 · free proof, full refund until you approve
$1.43