
Red 32 oz. Polar Camel Powder Coated Stainless Steel Pet Bowl
Red 32 oz. Polar Camel Powder Coated Stainless Steel Pet Bowl (item LPB022) is in our Pet Bowls range of Pet, with a 2 in x 2 in personalization area. At 48 pieces it costs $49.65 each all-in: $38.40 for the piece plus $11.25 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $48.00 | - |
| 12-23 | $44.16 | save 8% |
| 24-47 | $41.28 | save 14% |
| 48-95 | $38.40 | save 20% |
| 96-249 | $35.52 | save 26% |
| 250-499 | $32.64 | save 32% |
| 500+ | $29.76 | save 38% |
Sold loose or by the case of 12. Ask us if you want a full case: we will check the case price for you.
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 2in x 2in.
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
What is the Red 32 oz. Polar Camel Powder Coated Stainless Steel Pet Bowl?
The Red 32 oz. Polar Camel Powder Coated Stainless Steel Pet Bowl is what most buyers mean when they ask for a pet bowl that will not look cheap in six months. It measures 3" (H) x 6 3/4" diameter x 1/4" (T). This is the red colorway.
The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. The outer wall never sweats, so it will not leave rings on a conference table or slip out of a hand on a job site.
The powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does. Pet items get extraordinary emotional engagement and almost no competition in a typical promotional catalog.
At this level the piece is doing relationship work, not advertising work. Reserve it for named recipients, key clients, top performers, long-service milestones, and personalize it individually. Concretely: $48.00 each at 1-11, $29.76 at 500+.
Specifications
| Item number | LPB022 |
|---|---|
| Product type | Pet Bowl |
| Material | Stainless Steel |
| Capacity | 32 oz |
| Dimensions | 3" (H) x 6 3/4" diameter x 1/4" (T) |
| Shipping weight | 1.2 lb |
| Color | Red |
| Decoration methods | Laser Engraving, UV Printing, Color Fill |
| Standard imprint area | 2 in x 2 in |
| Minimum order | 1 piece |
| Durability | Very high: realistically a multi-year item. |
| Care | Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. |
| Category | Pet |
| Collection | Pet Bowls |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 2 in x 2 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Multi-color logos, gradients, photographs and exact brand-color matching.
Full color, including white ink on dark substrates.
Color Fill
Engraved or carved recesses are filled with pigment. A permanent engraved mark that reads in brand color rather than substrate color.
Metal and crystal where the logo must be recognisably on-brand.
Matched to Pantone where the recess allows.
Artwork requirements
- Convert all type to outlines so fonts do not substitute in production.
- Artwork we redraw stays on file under your item number, so the next order runs from the same corrected file.
- Send the file you have, even if it is imperfect. We will tell you honestly whether it will hold up and redraw it if it will not.
- Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
- A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.
- Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
Production schedule
| Proof to you | Within one business day of usable artwork arriving |
|---|---|
| Production, standard | 3 to 5 business days, counted from your approval |
| Production, rush | quoted per job, confirmed in writing before you pay |
| Transit by ground | 1 to 5 business days, by distance from the shipping point |
Common uses
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
Trade Shows & Conferences
Booth traffic is not the metric: what leaves the hall and stays in use is. The giveaway is a conversation opener, not a memory device. Its real job is giving someone a reason to stand still for ninety seconds, which is why something that invites a question outperforms something that merely carries a logo. The pet bowl format earns its place here on keep-rate rather than headline price. Give this to the handful of people who genuinely moved the number.
Healthcare & Senior Living
Healthcare buyers screen for practicality and hygiene before they screen for design. Easy-clean surfaces, no small detachable parts, and legible large-format personalization all matter. Staff appreciation is a genuine retention lever in this sector, and a good piece of drinkware or desk recognition costs a fraction of replacing a nurse. At this price the recipient list should fit on one page.
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Donors read the gift as a statement about stewardship. Something visibly expensive can cost you more in confidence than it earns in goodwill, which is why restraint and a personal inscription usually outperform scale in this sector. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. Executive tier. Treat the engraving as carefully as the invoice.
Weddings, Reunions & Milestone Events
Personal events are the one segment where the recipient genuinely wants the item personalized. Guests keep what they can use and discard what merely commemorates. An item that works on an ordinary Tuesday will outlive the event by years; one that only makes sense on the day will not survive the drive home. Even at volume it holds $29.76, which tells you what tier this is.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free on every order, at any quantity |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Rush is quoted per job, with the date confirmed in writing before payment |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | We keep the approved file, so a re-order reproduces it exactly |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about LPB022?
How long does production take?
Door to door at standard speed: a day for the proof, 3 to 5 business days in production, then 1 to 5 business days in transit. A rush is quoted per job, with the date confirmed in writing before you pay.
Can you work to a fixed in-hand date?
Yes, and it is the right way to brief us. Tell us the date the box has to be open rather than the date you want it shipped, and checkout works the schedule backwards from there. It refuses a date it cannot keep rather than accepting it and missing it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
How should this be cared for?
Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. LPB022 measures 3" (H) x 6 3/4" diameter x 1/4" (T) and is made of stainless steel. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level.
What artwork do you need from me?
Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 2 in x 2 in personalization area and tell you before you pay whether it holds up at that size.
What does it actually cost at quantity?
Most orders land near 48-95, which prices at $38.40 a piece. The published ladder on LPB022 runs from $48.00 a piece at 1-11 down to $29.76 at 500+, about 38% less per piece. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
Can I see a proof before you produce the order?
Always, and we do not start without written approval. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. Once approved, the proof becomes the specification for the run, so check the spelling and the placement carefully. The personalization area on LPB022 is 2 in x 2 in.
Do you ship to multiple addresses?
Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.
What is the minimum order for LPB022?
LPB022 can be ordered from a single piece. The published ladder on LPB022 runs from $48.00 a piece at 1-11 down to $29.76 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on LPB022 is 2 in x 2 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of LPB022 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range








People also considered
Same decision, different trade-off.






What LPB022 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 1 | $48.00 | $43.75 | $91.75 | $91.75 | Priced by weight |
| 12 | $44.16 | $13.25 | $57.41 | $688.92 | Free |
| 24 | $41.28 | $12.00 | $53.28 | $1,278.72 | Free |
| 48 | $38.40 | $11.25 | $49.65 | $2,383.20 | Free |
| 96 | $35.52 | $11.00 | $46.52 | $4,465.92 | Free |
| 250 | $32.64 | $10.75 | $43.39 | $10,847.50 | Free |
| 500 | $29.76 | $10.50 | $40.26 | $20,130.00 | Free |
- Ground freight is free from 12 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 2 in by 2 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- Setup is free at every quantity, including 1.