
Stainless Steel Polar Camel 64 oz. Vacuum Insulated Growler with Swing-Top
Stainless Steel Polar Camel 64 oz. Vacuum Insulated Growler with Swing-Top (item LGR641) is in our Barware range, with a 3.2 in x 4 in personalization area. At 48 pieces it costs $69.80 each all-in: $56.80 for the piece plus $13.00 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $71.00 | - |
| 12-23 | $65.32 | save 8% |
| 24-47 | $61.06 | save 14% |
| 48-95 | $56.80 | save 20% |
| 96-249 | $52.54 | save 26% |
| 250-499 | $48.28 | save 32% |
| 500+ | $44.02 | save 38% |
Sold loose or by the case of 4. Ask us if you want a full case: we will check the case price for you.
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 3.2in x 4in.
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
What is the Stainless Steel Polar Camel 64 oz. Vacuum Insulated Growler with Swing-Top?
The Stainless Steel Polar Camel 64 oz. Vacuum Insulated Growler with Swing-Top is a growler at 64 oz built around 18/8 food-grade stainless steel with a double-wall vacuum-insulated construction and a powder-coated exterior. It measures 4 3/4" x 4 3/4" x 13 1/4".
The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. The outer wall never sweats, so it will not leave rings on a conference table or slip out of a hand on a job site. That is the difference between something kept and something replaced.
A growler is refillable by design, which means repeat visits to whoever filled it first. The powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does.
At this level the piece is doing relationship work, not advertising work. Reserve it for named recipients, key clients, top performers, long-service milestones, and personalize it individually. Concretely: $71.00 each at 1-11, $44.02 at 500+.
Specifications
| Item number | LGR641 |
|---|---|
| Product type | Growler |
| Material | Stainless Steel |
| Capacity | 64 oz |
| Dimensions | 4 3/4" x 4 3/4" x 13 1/4" |
| Shipping weight | 2.5 lb |
| Color | Stainless Steel |
| Decoration methods | Laser Engraving, UV Printing, Color Fill |
| Standard imprint area | 3.2 in x 4 in |
| Minimum order | 1 piece |
| Durability | Very high: realistically a multi-year item. |
| Care | Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. |
| Category | Barware |
| Collection | Barware |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 3.2 in x 4 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Multi-color logos, gradients, photographs and exact brand-color matching.
Full color, including white ink on dark substrates.
Color Fill
Engraved or carved recesses are filled with pigment. A permanent engraved mark that reads in brand color rather than substrate color.
Metal and crystal where the logo must be recognisably on-brand.
Matched to Pantone where the recess allows.
Artwork requirements
- Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
- Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- Supply Pantone (PMS) references for any color that has to match exactly.
- Send the file you have, even if it is imperfect. We will tell you honestly whether it will hold up and redraw it if it will not.
- Do not spend a week hunting for the perfect file. Send what exists and we will tell you what is usable.
Production schedule
| Digital proof | Same or next business day |
|---|---|
| Standard run | 3 to 5 business days once the proof is signed off |
| Rush run | quoted per job once the proof is signed off, with the date confirmed in writing |
| Delivery | 1 to 5 business days on the ground network |
Common uses
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
Weddings, Reunions & Milestone Events
Personal events are the one segment where the recipient genuinely wants the item personalized. Guests keep what they can use and discard what merely commemorates. An item that works on an ordinary Tuesday will outlive the event by years; one that only makes sense on the day will not survive the drive home. A growler is refillable by design, which means repeat visits to whoever filled it first. Even at volume it holds $44.02, which tells you what tier this is.
Hospitality, Restaurants & Breweries
In hospitality the promotional item and the retail item are the same object. Branded glassware and drinkware serve guests, then sell to guests at the end of the visit. That dual use changes the maths entirely. The decoration cost is recovered at the till rather than written off to marketing. The powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does. Spend it where the relationship is worth more than the invoice.
Corporate Gifting & Client Appreciation
Client gifting has one job: to be kept. Timing beats budget in this segment. The same gift sent a week after a renewal lands completely differently from one sent in December with four hundred others, because in January it is the only thing on the desk. Buy for the calendar you control rather than the one everybody shares. The growler format earns its place here on keep-rate rather than headline price. At $71.00 before breaks this is relationship work, not advertising.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free on every order, at any quantity |
| Freight | Free ground freight on every order over $250; split shipping to individual addresses available |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | Re-orders run from the file you already approved |
| Shipping | Free ground freight on every order over $250; split shipping to individual addresses available |
What do buyers ask about LGR641?
How should this be cared for?
Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. LGR641 measures 4 3/4" x 4 3/4" x 13 1/4" and is made of stainless steel. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level.
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
Can I get a sample before committing?
Yes: order one piece. LGR641 sells from a single unit at $71.00, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.
What if the artwork does not fit the imprint area?
The personalization area on LGR641 is 3.2 in x 4 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
Is there a setup charge?
There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
What artwork do you need from me?
Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 3.2 in x 4 in personalization area and tell you before you pay whether it holds up at that size.
Can I order more later and have them match?
Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on LGR641 runs from $71.00 a piece at 1-11 down to $44.02 at 500+, about 38% less per piece.
What is the minimum order for LGR641?
LGR641 can be ordered from a single piece. The published ladder on LGR641 runs from $71.00 a piece at 1-11 down to $44.02 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on LGR641 is 3.2 in x 4 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of LGR641 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofPeople also considered
Same decision, different trade-off.






What LGR641 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 1 | $71.00 | $45.50 | $116.50 | $116.50 | Priced by weight |
| 12 | $65.32 | $15.00 | $80.32 | $963.84 | Free |
| 24 | $61.06 | $13.50 | $74.56 | $1,789.44 | Free |
| 48 | $56.80 | $13.00 | $69.80 | $3,350.40 | Free |
| 96 | $52.54 | $12.50 | $65.04 | $6,243.84 | Free |
| 250 | $48.28 | $12.25 | $60.53 | $15,132.50 | Free |
| 500 | $44.02 | $12.25 | $56.27 | $28,135.00 | Free |
- Ground freight is free from 12 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 3.2 in by 4 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 7% of the 170 other priced items in Barware. It sits at the dearer end of that range, which is usually the material rather than the margin.
- Setup is free at every quantity, including 1.