Torch Galaxy Medal-Bronze
Item GM110B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Other options in this range
Zinc Alloy
Torch Galaxy Medal-Silver
Torch Galaxy Medal-Silver (item GM110S) is in our Victory/Torch/Achievement range of Awards & Recognition, with a 1.35 in x 1.01 in personalization area. At 48 pieces it costs $5.07 each all-in: $3.32 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.57
each at 500+ · $4.15 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $4.15 | - |
| 12-23 | $3.82 | save 8% |
| 24-47 | $3.57 | save 14% |
| 48-95 | $3.32 | save 20% |
| 96-249 | $3.07 | save 26% |
| 250-499 | $2.82 | save 32% |
| 500+ | $2.57 | save 38% |
✓ 332 in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.35in x 1.01in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Torch Galaxy Medal-Silver?
Item GM110S is a medal in zinc alloy, chosen for how well it takes a mark and how long that mark lasts. It measures 2 1/4". This is the silver colorway.
Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed. Plating then sets the finish. Gold, silver or bronze.
Medals scale to hundreds of recipients at a cost per person that no other award form matches. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess. The two together are why this item re-orders.
This is table-stock: priced to be handed out freely. The metric that matters is how many you can put into circulation, not what each one felt like to give. Concretely: $4.15 each at 1-11, $2.57 at 500+.
Specifications
| Item number | GM110S |
|---|---|
| Product type | Medal |
| Material | Zinc Alloy |
| Dimensions | 2 1/4" |
| Height | 2 1/4" |
| Shipping weight | 1 oz |
| Color | Silver |
| Decoration methods | Die Struck, Printed Insert, Laser Engraving (back) |
| Standard imprint area | 1.35 in x 1.01 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. |
| Category | Awards & Recognition |
| Collection | Victory/Torch/Achievement |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.35 in x 1.01 in.
Die Struck
The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal.
Best for
Medals, coins and lapel pins.
Color
Metal finish, optionally enamel-filled.
Printed Insert
A printed or sublimated disc is set into the recess of the piece. Full-color artwork inside a cast metal frame.
Best for
Medals and emblem holders where color is required.
Color
Full color.
Laser Engraving (back)
The reverse face is laser engraved. Personalization without disturbing the struck front face.
Best for
Medals with a standard front and individual backs.
Color
Substrate color.
Artwork requirements
- Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
- Type should be converted to curves or outlines, otherwise a missing font silently substitutes on our end.
- If the logo is only available as a bitmap, we need it at 300 dpi or better at final size, ideally on a transparent background.
- A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.
- Send vector if you have it. A .ai, .eps, .pdf or .svg scales to any imprint without softening.
- Supply Pantone (PMS) references for any color that has to match exactly.
Production schedule
| Digital proof | Same or next business day |
|---|---|
| Standard run | 3 to 5 business days once the proof is signed off |
| Rush run | quoted per job once the proof is signed off, with the date confirmed in writing |
| Delivery | 1 to 5 business days on the ground network |
Common uses
Races and tournamentsA natural fit for races and tournaments, which is one of the settings this medal was specified for.
School achievementSchool achievement is where this earns its cost, and where buyers re-order it.
Participation recognitionA natural fit for participation recognition, which is one of the settings this medal was specified for.
Community and civic eventsLocal sponsorships and volunteer thanks, where visible presence matters more than volume.
Recruiting and onboardingIncluded in offer packs and first-day kits, where the object is doing culture work from the very first hour.
Client thank-you programsSent after a renewal, a referral or a project close, when the relationship is warm and the gesture will land.
Safety and quality milestonesMarking a record that took every person on the floor to achieve, with something they can point at.
Employee milestonesAnniversaries, promotions and retirements: the moments where a personalized object does what an email cannot.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Recognition pieces for major donors and board members are the clearest win: they are relatively few, they are highly personal, and they materially affect renewal. For event merchandise, price the item to sell rather than to give. Buy for coverage. The arithmetic rewards it and the budget will not notice.
2
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. Awards are read as a hierarchy whether or not you intended one. If the participation piece and the champion piece look similar, the champion feels short-changed, and that is remembered longer than the result. Minimum order is a single piece, which suits how this segment tends to buy. At $4.15 before breaks it is cheap enough to hand out without counting.
3
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Medals scale to hundreds of recipients at a cost per person that no other award form matches. The unit cost here is low enough that reach matters more than restraint.
4
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess. Order deep. At this price the waste of a few extra is cheaper than running short.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight on every order over $250; split shipping to individual addresses available |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Digital proof within 1 business day; production begins on written approval |
| Re-orders | We keep the approved file, so a re-order reproduces it exactly |
| Shipping | Free ground freight on every order over $250; split shipping to individual addresses available |
What do buyers ask about GM110S?
What artwork do you need from me?
Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 1.35 in x 1.01 in personalization area and tell you before you pay whether it holds up at that size.
What happens if something arrives damaged?
Tell us within 10 days of delivery and we replace it. Note any damage on the freight bill before you sign for it, because that is what the carrier claim turns on. Resolving it with the carrier is our job, not yours. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Is there a setup charge?
There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
How long does production take?
Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. The clock starts when you approve the proof, not when you place the order. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. A rush is quoted per job, with the date confirmed in writing before you pay.
How should this be cared for?
Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. GM110S measures 2 1/4" and is made of zinc alloy. Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed.
Can I get a sample before committing?
Yes: order one piece. GM110S sells from a single unit at $4.15, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
What is the minimum order for GM110S?
GM110S can be ordered from a single piece. The published ladder on GM110S runs from $4.15 a piece at 1-11 down to $2.57 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on GM110S is 1.35 in x 1.01 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of GM110S decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
People also considered
Same decision, different trade-off.
Torch Ten Star Medal-Bronze
Item TS416B
$2.57 ea at volume, blank
plus $1.00 each to engrave
Torch Ten Star Medal-Gold
Item TS416G
$2.57 ea at volume, blank
plus $1.00 each to engrave
Torch Ten Star Medal-Silver
Item TS416S
$2.57 ea at volume, blank
plus $1.00 each to engrave
Torch Shooting Star Medal-Bronze
Item ST14B
$2.36 ea at volume, blank
plus $1.00 each to engrave
Torch Shooting Star Medal-Gold
Item ST14G
$2.36 ea at volume, blank
plus $1.00 each to engrave
Torch Shooting Star Medal-Silver
Item ST14S
$2.36 ea at volume, blank
plus $1.00 each to engrave
Torch Galaxy Medal-SilverItem GM110S · free proof, full refund until you approve
$2.57
What GM110S costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $3.82 | $3.75 | $7.57 | $90.84 | Priced by weight |
| 24 | $3.57 | $2.25 | $5.82 | $139.68 | Priced by weight |
| 48 | $3.32 | $1.75 | $5.07 | $243.36 | Priced by weight |
| 96 | $3.07 | $1.25 | $4.32 | $414.72 | Free |
| 250 | $2.82 | $1.00 | $3.82 | $955.00 | Free |
| 500 | $2.57 | $1.00 | $3.57 | $1,785.00 | Free |
- Ground freight is free from 96 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.35 in by 1.01 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 80% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.