Frost Large Silicone Straw
Item SST250
$2.33 ea at volume
Stainless Steel
10" Stainless Steel Straw
10" Stainless Steel Straw (item PCSTRAW1) is in our Straws range of Drinkware Accessories, with a 5 in x 5 in personalization area. The piece is $3.75 at 1-11 and $2.33 at 500+; engraving is priced on your artwork. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.33
each at 500+ · $3.75 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $3.75 | - |
| 12-23 | $3.45 | save 8% |
| 24-47 | $3.23 | save 14% |
| 48-95 | $3.00 | save 20% |
| 96-249 | $2.78 | save 26% |
| 250-499 | $2.55 | save 32% |
| 500+ | $2.33 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 12. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 5in x 5in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the 10" Stainless Steel Straw?
10" Stainless Steel Straw. A straw set in stainless steel, specified for decoration and for daily use rather than for a display shelf. It measures 10".
The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. The outer wall never sweats, so it will not leave rings on a conference table or slip out of a hand on a job site. That is the difference between something kept and something replaced.
Reusable straws are a low-cost add-on that upgrades a drinkware gift into a set. On this substrate specifically: the powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does.
This sits in the giveaway tier, where the job is reach: enough units to hand one to everyone who walks past the table, at a cost per impression low enough that nobody has to justify it line by line. Concretely: $3.75 each at 1-11, $2.33 at 500+.
Specifications
| Item number | PCSTRAW1 |
|---|---|
| Product type | Straw |
| Material | Stainless Steel |
| Dimensions | 10" |
| Shipping weight | 1 oz |
| Color | Silver |
| Decoration methods | Laser Engraving, UV Printing, Color Fill |
| Standard imprint area | 5 in x 5 in |
| Minimum order | 1 piece |
| Durability | Very high: realistically a multi-year item. |
| Care | Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. |
| Category | Drinkware Accessories |
| Collection | Straws |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 5 in x 5 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Color Fill
Engraved or carved recesses are filled with pigment. A permanent engraved mark that reads in brand color rather than substrate color.
Best for
Metal and crystal where the logo must be recognisably on-brand.
Color
Matched to Pantone where the recess allows.
Artwork requirements
- A digital proof comes back to you first, every time. Production starts on your written approval and not before.
- A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.
- Do not spend a week hunting for the perfect file. Send what exists and we will tell you what is usable.
- If brand color accuracy matters, give us the Pantone numbers rather than a screenshot to match.
- If the logo is only available as a bitmap, we need it at 300 dpi or better at final size, ideally on a transparent background.
Production schedule
| Proof to you | Within one business day of usable artwork arriving |
|---|---|
| Production, standard | 3 to 5 business days, counted from your approval |
| Production, rush | quoted per job, confirmed in writing before you pay |
| Transit by ground | 1 to 5 business days, by distance from the shipping point |
Common uses
Sustainability programsSpecified regularly for sustainability programs. The imprint area at 5 in x 5 in is sized for exactly that job.
Add-on giftingA natural fit for add-on gifting, which is one of the settings this straw set was specified for.
Safety and quality milestonesMarking a record that took every person on the floor to achieve, with something they can point at.
Event and conference giftingHanded to qualified conversations rather than to everyone, so the spend goes where the pipeline is.
Community and civic eventsLocal sponsorships and volunteer thanks, where visible presence matters more than volume.
Recruiting and onboardingIncluded in offer packs and first-day kits, where the object is doing culture work from the very first hour.
Customer loyalty tiersA physical marker of status that an account dashboard cannot replicate.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Weddings, Reunions & Milestone Events
Personal events are the one segment where the recipient genuinely wants the item personalized. The deadline is absolute in a way it is not in any other segment. A wedding does not move, which means production scheduling, not selection, is where these orders fail. Lock artwork six weeks out and the rest is straightforward. The straw set format earns its place here on keep-rate rather than headline price. Order deep. At this price the waste of a few extra is cheaper than running short.
2
Corporate Gifting & Client Appreciation
Client gifting has one job: to be kept. The recipient is rarely the decision maker you are trying to reach, which is the part most programs get wrong. Choose something that will sit in a shared space rather than a drawer, and the gift starts working on people who were never on your list. Volume is the point at $3.75; nobody is auditing this line item.
3
Hospitality, Restaurants & Breweries
In hospitality the promotional item and the retail item are the same object. Branded glassware and drinkware serve guests, then sell to guests at the end of the visit. That dual use changes the maths entirely. The decoration cost is recovered at the till rather than written off to marketing. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. Cost per impression is the number that matters here, and it is very low.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight on every order over $250; split shipping to individual addresses available |
| Rush service | Rush available: tell us the date and we confirm it in writing before you pay |
| Proofing | Digital proof within 1 business day; production begins on written approval |
| Re-orders | We keep the approved file, so a re-order reproduces it exactly |
| Shipping | Free ground freight on every order over $250; split shipping to individual addresses available |
What do buyers ask about PCSTRAW1?
How long does production take?
Door to door at standard speed: a day for the proof, 3 to 5 business days in production, then 1 to 5 business days in transit. A rush is quoted per job, with the date confirmed in writing before you pay.
How is this decorated?
Laser Engraving is the primary method on PCSTRAW1. A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved. We can also run UV Printing and Color Fill on this item if the artwork calls for it. The personalization area on PCSTRAW1 is 5 in x 5 in.
What artwork do you need from me?
Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 5 in x 5 in personalization area and tell you before you pay whether it holds up at that size.
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
How should this be cared for?
Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. PCSTRAW1 measures 10" and is made of stainless steel. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level.
Can I mix colors or sizes to reach a quantity break?
Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on PCSTRAW1 runs from $3.75 a piece at 1-11 down to $2.33 at 500+, about 38% less per piece.
Can I order more later and have them match?
Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on PCSTRAW1 runs from $3.75 a piece at 1-11 down to $2.33 at 500+, about 38% less per piece.
What is the minimum order for PCSTRAW1?
PCSTRAW1 can be ordered from a single piece. The published ladder on PCSTRAW1 runs from $3.75 a piece at 1-11 down to $2.33 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on PCSTRAW1 is 5 in x 5 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of PCSTRAW1 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofPeople also considered
Same decision, different trade-off.
10" Stainless Steel StrawItem PCSTRAW1 · free proof, full refund until you approve
$2.33