Free setup · Free digital proof · Free freight over $250
orders@goldstarsupply.com · Mon-Fri 8am-6pm ET
3 3/4" Gray Carabiner
Other options in this range

3 3/4" Gray Carabiner

Item CRB102 · 3 3/4" · Drinkware

3 3/4" Gray Carabiner (item CRB102) is in our Handles/Carabiners range of Drinkware, with a 2.25 in x 1.88 in personalization area. At 48 pieces it costs $8.65 each all-in: $5.40 for the piece plus $3.25 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.

Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of ground transit. It holds if your artwork is with us today and you approve the proof within one business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21. We promise the late end, because a date is worth nothing if we miss it.
$4.18 each at 500+ · $6.75 at 1
QuantityPrice eachYou save
1-11$6.75 -
12-23$6.21 save 8%
24-47$5.81 save 14%
48-95$5.40 save 20%
96-249$5.00 save 26%
250-499$4.59 save 32%
500+$4.18 save 38%
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)

Sold loose or by the case of 12. Ask us if you want a full case: we will check the case price for you.

See your logo on it

Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 2.25in x 1.88in.

Or have us spec it →
Included at no extra charge
  • No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
  • Free digital proof before anything is produced
  • Free artwork check at the real imprint size
  • Free ground freight on orders over $250
  • Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and shown in full before you pay, never added afterwards.

What is the 3 3/4" Gray Carabiner?

Item CRB102 is a promotional product in quality materials, chosen for how well it takes a mark and how long that mark lasts. It measures 3 3/4". This is the gray colorway.

Built to survive real use rather than a single event, that is what separates a promotional item that keeps working from one that ends up in a drawer. That is the difference between something kept and something replaced.

Chosen for a combination of perceived value, decoration quality and keep-rate rather than headline unit price. Decoration method is matched to the substrate so the mark is permanent rather than printed on top. The two together are why this item re-orders.

At this level the item is buying attention rather than gratitude. Order enough to be generous with it, because restraint here saves very little and costs reach. Concretely: $6.75 each at 1-11, $4.18 at 500+.

Specifications

Item numberCRB102
Product typePromotional product
MaterialMetal/plastic
Dimensions3 3/4"
Shipping weight1 oz
ColorGray
Decoration methodsLaser Engraving, UV Printing
Standard imprint area2.25 in x 1.88 in
Minimum order1 piece
DurabilityHigh.
CareWipe clean with a soft damp cloth.
CategoryDrinkware
CollectionHandles/Carabiners

Decoration options

The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 2.25 in x 1.88 in.

Laser Engraving

A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.

Best for

Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.

Color

Single color: the natural color of the material under the surface.

UV Printing

UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.

Best for

Multi-color logos, gradients, photographs and exact brand-color matching.

Color

Full color, including white ink on dark substrates.

Artwork requirements

  • Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
  • Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
  • If the logo is only available as a bitmap, we need it at 300 dpi or better at final size, ideally on a transparent background.
  • Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
  • Artwork we redraw stays on file under your item number, so the next order runs from the same corrected file.
  • Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.

Production schedule

Proof to youWithin one business day of usable artwork arriving
Production, standard3 to 5 business days, counted from your approval
Production, rushquoted per job, confirmed in writing before you pay
Transit by ground1 to 5 business days, by distance from the shipping point

Common uses

Corporate giftingA natural fit for corporate gifting, which is one of the settings this promotional product was specified for.
Events and trade showsEvents and trade shows is where this earns its cost, and where buyers re-order it.
Employee recognitionEmployee recognition is where this earns its cost, and where buyers re-order it.
Employee milestonesAnniversaries, promotions and retirements: the moments where a personalized object does what an email cannot.
Remote team welcome kitsShipped to a home address, which for a distributed team is the only physical touch the company gets.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Internal contests and incentivesA tangible prize outperforms a gift card for exactly the reason you would expect. It stays on the desk.

Where this works best

The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.

1

Employee Recognition & Service Awards

Recognition fails when the object does not match the words. Consistency is what makes a recognition program credible. If a ten year award looks better this year than it did last year, everyone who got last year's version notices. Lock the specification and the supplier, and treat the item list as something you change deliberately rather than annually. At $6.75 before breaks it is cheap enough to hand out without counting.

2

Trade Shows & Conferences

Booth traffic is not the metric: what leaves the hall and stays in use is. Run a two-tier giveaway: a low-cost item for everyone who stops, and a genuinely good piece reserved for qualified conversations. The second tier is what people remember when your follow-up email arrives a week later. Minimum order is a single piece, which suits how this segment tends to buy. The unit cost here is low enough that reach matters more than restraint.

3

Onboarding & New Hire Kits

Day one sets the tone for everything after it. Order for the year, not the hire. Onboarding kits fail on availability rather than design: a start date arrives, the item is out of stock, and the new person gets an apology instead of a welcome. Hold quantity against forecast headcount and the problem disappears. Chosen for a combination of perceived value, decoration quality and keep-rate rather than headline unit price. Order deep. At this price the waste of a few extra is cheaper than running short.

4

Education, Schools & Universities

Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Decoration method is matched to the substrate so the mark is permanent rather than printed on top. Volume is the point at $6.75; nobody is auditing this line item.

5

Nonprofit & Fundraising

Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Recognition pieces for major donors and board members are the clearest win: they are relatively few, they are highly personal, and they materially affect renewal. For event merchandise, price the item to sell rather than to give. The promotional product format earns its place here on keep-rate rather than headline price. Cost per impression is the number that matters here, and it is very low.

6

Corporate Gifting & Client Appreciation

Client gifting has one job: to be kept. Timing beats budget in this segment. The same gift sent a week after a renewal lands completely differently from one sent in December with four hundred others, because in January it is the only thing on the desk. Buy for the calendar you control rather than the one everybody shares. Cheap enough to over-order slightly, which is the right call for a table.

How does ordering and turnaround work?

Minimum order1 piece
SetupNone: setup is built into the price
FreightFree ground freight above $250, and we can split a run across individual addresses
Rush serviceRush available: tell us the date and we confirm it in writing before you pay
ProofingProof back to you next business day, and nothing runs until you approve it
Re-ordersWe keep the approved file, so a re-order reproduces it exactly
ShippingFree ground freight above $250, and we can split a run across individual addresses

What do buyers ask about CRB102?

Can I see a proof before you produce the order?

Always, and we do not start without written approval. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. Once approved, the proof becomes the specification for the run, so check the spelling and the placement carefully. The personalization area on CRB102 is 2.25 in x 1.88 in.

What does it actually cost at quantity?

The published ladder on CRB102 runs from $6.75 a piece at 1-11 down to $4.18 at 500+, about 38% less per piece. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.

Can I mix colors or sizes to reach a quantity break?

Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on CRB102 runs from $6.75 a piece at 1-11 down to $4.18 at 500+, about 38% less per piece.

Do you ship to multiple addresses?

Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.

Can I get a sample before committing?

Yes: order one piece. CRB102 sells from a single unit at $6.75, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.

How is this decorated?

Laser Engraving is the primary method on CRB102. A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved. We can also run UV Printing on this item if the artwork calls for it. The personalization area on CRB102 is 2.25 in x 1.88 in.

What happens if something arrives damaged?

We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.

What is the minimum order for CRB102?

CRB102 can be ordered from a single piece. The published ladder on CRB102 runs from $6.75 a piece at 1-11 down to $4.18 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on CRB102 is 2.25 in x 1.88 in.

See it with your logo first

Send us your artwork and we will produce a free digital proof of CRB102 decorated with your mark. Usually within one business day, with no obligation and no account required.

Get a free proof

More from this range

People also considered

Same decision, different trade-off.

3 3/4" Gray CarabinerItem CRB102 · free proof, full refund until you approve
$4.18

What CRB102 costs at each quantity

The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.

QuantityPieceEngraving All-in eachOrder totalGround freight
12 $6.21 $5.50 $11.71 $140.52 Priced by weight
24 $5.81 $4.00 $9.81 $235.44 Priced by weight
48 $5.40 $3.25 $8.65 $415.20 Free
96 $5.00 $3.00 $8.00 $768.00 Free
250 $4.59 $2.75 $7.34 $1,835.00 Free
500 $4.18 $2.75 $6.93 $3,465.00 Free
  • Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
  • The personalization area is 2.25 in by 1.88 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
  • At 50 pieces this costs less than 90% of the 532 other priced items in Drinkware.
  • The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
  • Setup is free at every quantity, including 12.