3" x 1.25" Gloss White Unisub Aluminum Name Badge with Radius Corners
Item UN4460
$1.10 ea at volume
Other options in this range
Aluminum
3" x 2" Gloss White Unisub Aluminum Name Badge with Radius Corners
3" x 2" Gloss White Unisub Aluminum Name Badge with Radius Corners (item UN4467) is in our Name Plates & Desk Wedges range of Signage & Badges, with a 1.5 in x 1 in personalization area. At 48 pieces it costs $5.76 each all-in: $4.01 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$3.11
each at 500+ · $5.01 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $5.01 | - |
| 12-23 | $4.61 | save 8% |
| 24-47 | $4.31 | save 14% |
| 48-95 | $4.01 | save 20% |
| 96-249 | $3.71 | save 26% |
| 250-499 | $3.41 | save 32% |
| 500+ | $3.11 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 100. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.5in x 1in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the 3" x 2" Gloss White Unisub Aluminum Name Badge with Radius Corners?
Item UN4467 is a name badge in aluminum, chosen for how well it takes a mark and how long that mark lasts. It measures 3"(L) x 2"(H) x .025" thick. This is the gloss white colorway.
Aluminum gives you a metal look and metal durability at a fraction of the weight, and it matters when you are shipping several hundred units..
Laser engraving cuts through the anodised layer to bright metal. Sublimation-coated aluminum also accepts full-color photographic printing. Badges are the most-read piece of branded material an organization produces.
This is table-stock: priced to be handed out freely. The metric that matters is how many you can put into circulation, not what each one felt like to give. Concretely: $5.01 each at 1-11, $3.11 at 500+.
Specifications
| Item number | UN4467 |
|---|---|
| Product type | Name Badge |
| Material | Aluminum |
| Dimensions | 3"(L) x 2"(H) x .025" thick |
| Shipping weight | 0 oz |
| Color | Gloss White |
| Decoration methods | Laser Engraving, Dye Sublimation, UV Printing |
| Standard imprint area | 1.5 in x 1 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe clean with a damp cloth. |
| Category | Signage & Badges |
| Collection | Name Plates & Desk Wedges |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.5 in x 1 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
Dye Sublimation
Heat converts solid dye to gas, which bonds into a polyester coating or ceramic glaze. Full-color artwork embedded in the surface rather than sitting on top of it.
Best for
Full-wrap photographic decoration on mugs, coated drinkware and coated metal.
Color
Full color. Cannot print white. The substrate supplies white.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Artwork requirements
- Supply Pantone (PMS) references for any color that has to match exactly.
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- Send the file you have, even if it is imperfect. We will tell you honestly whether it will hold up and redraw it if it will not.
- Artwork we redraw stays on file under your item number, so the next order runs from the same corrected file.
- Convert all type to outlines so fonts do not substitute in production.
- Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
Production schedule
| Digital proof | Same or next business day |
|---|---|
| Standard run | 3 to 5 business days once the proof is signed off |
| Rush run | quoted per job once the proof is signed off, with the date confirmed in writing |
| Delivery | 1 to 5 business days on the ground network |
Common uses
Staff identificationWorks well for staff identification, where the name badge format does what a printed handout cannot.
ConferencesConferences is where this earns its cost, and where buyers re-order it.
Hospitality and retail teamsWorks well for hospitality and retail teams, where the name badge format does what a printed handout cannot.
Event and conference giftingHanded to qualified conversations rather than to everyone, so the spend goes where the pipeline is.
Fundraising and donor recognitionThanking the people who gave, in a form that quietly encourages the next person to.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Team and department awardsRecognizing a group without the cost or ceremony of individual crystal for every person.
Remote team welcome kitsShipped to a home address, which for a distributed team is the only physical touch the company gets.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Hospitality, Restaurants & Breweries
In hospitality the promotional item and the retail item are the same object. Branded glassware and drinkware serve guests, then sell to guests at the end of the visit. That dual use changes the maths entirely. The decoration cost is recovered at the till rather than written off to marketing. Laser engraving cuts through the anodised layer to bright metal. Sublimation-coated aluminum also accepts full-color photographic printing. Volume is the point at $5.01; nobody is auditing this line item.
2
Healthcare & Senior Living
Healthcare buyers screen for practicality and hygiene before they screen for design. Shift work changes the specification. Items are carried between home, locker and ward, so anything that leaks, breaks or cannot go through a dishwasher gets abandoned within a fortnight regardless of how good it looked at the point of purchase. The name badge format earns its place here on keep-rate rather than headline price. Cost per impression is the number that matters here, and it is very low.
3
Franchise & Multi-Location Brands
The hard problem in multi-location branding is consistency, not creativity. Artwork drift is cumulative and invisible until it is severe. A locked file held centrally against each item number, rather than a logo emailed between locations, is what stops forty sites gradually producing forty logos. Cheap enough to over-order slightly, which is the right call for a table.
4
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Aluminum gives you a metal look and metal durability at a fraction of the weight, and it matters when you are shipping several hundred units.. At this price the risk is under-ordering, not over-ordering.
5
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Departments buy separately even when the brand is shared, which is how a university ends up with nine versions of its own crest. A single approved item list with locked artwork solves more than any individual purchasing decision will. Down to $3.11 at volume, which is where this stops being a cost.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | Re-orders run from the file you already approved |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about UN4467?
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
What artwork do you need from me?
Send vector if it exists, raster at 300 dpi if it does not, and whatever you have if neither. The personalization area on UN4467 is 1.5 in x 1 in, and we redraw or re-proportion anything that will not survive it. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
How long does production take?
Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. The clock starts when you approve the proof, not when you place the order. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. A rush is quoted per job, with the date confirmed in writing before you pay.
What if the artwork does not fit the imprint area?
The personalization area on UN4467 is 1.5 in x 1 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
What happens if something arrives damaged?
We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Can I see a proof before you produce the order?
Yes, and nothing runs until you have signed it off. Read it properly rather than skimming, because the approved proof is the specification we produce against. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
How should this be cared for?
Wipe clean with a damp cloth. UN4467 measures 3"(L) x 2"(H) x .025" thick and is made of aluminum. Aluminum gives you a metal look and metal durability at a fraction of the weight, and it matters when you are shipping several hundred units.
What is the minimum order for UN4467?
There is no minimum beyond one piece on UN4467. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on UN4467 runs from $5.01 a piece at 1-11 down to $3.11 at 500+, about 38% less per piece.
See it with your logo first
Send us your artwork and we will produce a free digital proof of UN4467 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
People also considered
Same decision, different trade-off.
3" x 2" Matte White Unisub Aluminum Name Badge with Radius Corners
Item UN4470
$3.11 ea at volume, blank
plus $1.00 each to engrave
1-Sided Aluminum Rectangle Name Badge
Item UN5733
$2.99 ea at volume, blank
plus $1.75 each to engrave
Silver Aluminum Rectangle Name Badge
Item UN5950
$3.31 ea at volume, blank
plus $1.00 each to engrave
Aluminum Rectangle Name Badge
Item UN5731
$3.52 ea at volume, blank
plus $1.75 each to engrave
Gloss White Aluminum Name Badge with Rouded Corners
Item UN4462
$3.57 ea at volume, blank
plus $1.75 each to engrave
Gloss White 1-Sided Aluminum Rectangle Name Badge
Item UN4461
$2.64 ea at volume, blank
plus $1.00 each to engrave
3" x 2" Gloss White Unisub Aluminum Name Badge with Radius CornersItem UN4467 · free proof, full refund until you approve
$3.11
What UN4467 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $4.61 | $3.75 | $8.36 | $100.32 | Priced by weight |
| 24 | $4.31 | $2.25 | $6.56 | $157.44 | Priced by weight |
| 48 | $4.01 | $1.75 | $5.76 | $276.48 | Free |
| 96 | $3.71 | $1.25 | $4.96 | $476.16 | Free |
| 250 | $3.41 | $1.00 | $4.41 | $1,102.50 | Free |
| 500 | $3.11 | $1.00 | $4.11 | $2,055.00 | Free |
- Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.5 in by 1 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 73% of the 73 other priced items in Signage & Badges.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.