Free setup · Free digital proof · Free freight over $250
orders@goldstarsupply.com · Mon-Fri 8am-6pm ET
4 1/4" x 6" Value Walnut Finish Plaque with 45 Degree Bevel Black Edge
Other options in this range
Walnut

4 1/4" x 6" Value Walnut Finish Plaque with 45 Degree Bevel Black Edge

Item VAL746 · 4 1/4" x 6" · Awards & Recognition

4 1/4" x 6" Value Walnut Finish Plaque with 45 Degree Bevel Black Edge (item VAL746) is in our Wood Plaques range of Awards & Recognition, with a 2.75 in x 4.5 in personalization area. The piece is $5.70 at 1-11 and $3.53 at 500+; engraving is priced on your artwork. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.

Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of ground transit. It holds if your artwork is with us today and you approve the proof within one business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21. We promise the late end, because a date is worth nothing if we miss it.
$3.53 each at 500+ · $5.70 at 1
QuantityPrice eachYou save
1-11$5.70 -
12-23$5.24 save 8%
24-47$4.90 save 14%
48-95$4.56 save 20%
96-249$4.22 save 26%
250-499$3.88 save 32%
500+$3.53 save 38%
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)

Sold loose or by the case of 52. Ask us if you want a full case: we will check the case price for you.

See your logo on it

Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 2.75in x 4.5in.

Or have us spec it →
Included at no extra charge
  • No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
  • Free digital proof before anything is produced
  • Free artwork check at the real imprint size
  • Free ground freight on orders over $250
  • Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and shown in full before you pay, never added afterwards.

What is the 4 1/4" x 6" Value Walnut Finish Plaque with 45 Degree Bevel Black Edge?

Catalogued as VAL746, this plaque sits in the part of the range that gets re-ordered rather than tried once. It measures 4 1/4" x 6". This is the black colorway.

Walnut is the darkest of the common domestic hardwoods, which gives engraving somewhere to sit. Grain varies piece to piece. An argument for it, not against it, on an award meant to feel individual. That is the difference between something kept and something replaced.

Laser engraving produces a near-black mark against the walnut, one of the highest-contrast wood results available. Wall-mounted recognition stays visible to everyone who walks past, not just the recipient.

This sits in the giveaway tier, where the job is reach: enough units to hand one to everyone who walks past the table, at a cost per impression low enough that nobody has to justify it line by line. Concretely: $5.70 each at 1-11, $3.53 at 500+.

Specifications

Item numberVAL746
Product typePlaque
MaterialWalnut
Dimensions4 1/4" x 6"
Shipping weight6 oz
ColorBlack
Decoration methodsLaser Engraving, UV Printing
Standard imprint area2.75 in x 4.5 in
Minimum order1 piece
DurabilityVery high.
CareDust with a dry cloth. Keep out of direct sun and away from radiators.
CategoryAwards & Recognition
CollectionWood Plaques

Decoration options

The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 2.75 in x 4.5 in.

Laser Engraving

A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.

Best for

Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.

Color

Single color: the natural color of the material under the surface.

UV Printing

UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.

Best for

Multi-color logos, gradients, photographs and exact brand-color matching.

Color

Full color, including white ink on dark substrates.

Artwork requirements

  • Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
  • A digital proof comes back to you first, every time. Production starts on your written approval and not before.
  • Artwork we redraw stays on file under your item number, so the next order runs from the same corrected file.
  • A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.
  • Supply Pantone (PMS) references for any color that has to match exactly.
  • We send a digital proof for written approval before production starts. Nothing goes on a machine until you sign it off.

Production schedule

Proof to youWithin one business day of usable artwork arriving
Production, standard3 to 5 business days, counted from your approval
Production, rushquoted per job, confirmed in writing before you pay
Transit by ground1 to 5 business days, by distance from the shipping point

Common uses

Service awardsWorks well for service awards, where the plaque format does what a printed handout cannot.
Donor recognitionA natural fit for donor recognition, which is one of the settings this plaque was specified for.
Sponsor and partner recognitionA natural fit for sponsor and partner recognition, which is one of the settings this plaque was specified for.
Community and civic eventsLocal sponsorships and volunteer thanks, where visible presence matters more than volume.
Recruiting and onboardingIncluded in offer packs and first-day kits, where the object is doing culture work from the very first hour.
Service anniversariesFive, ten and twenty years. The object marks the span in a way a announcement never manages.
Customer loyalty tiersA physical marker of status that an account dashboard cannot replicate.
Sponsorship and partner thanksGiven to the people who funded or enabled the work, in a form they can keep visible.

Where this works best

The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.

1

Government, Military & First Responders

This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. The plaque format earns its place here on keep-rate rather than headline price. Cheap enough to over-order slightly, which is the right call for a table.

2

Faith & Community Organizations

Faith communities give to mark moments rather than to advertise. These pieces are given once and kept for a lifetime, so the failure mode is not looking cheap but dating badly. Restrained typography and no year-specific styling means the piece still reads well in twenty years. At this price the risk is under-ordering, not over-ordering.

3

Sports Leagues, Tournaments & Clubs

Sport needs volume, deadlines and a clear hierarchy of awards. The order arrives before the results do, which means engraving strategy is the real decision. Generic plates with a separate engraved insert let you produce early and personalize late, and that is usually the difference between hitting the date and missing it. Walnut is the darkest of the common domestic hardwoods, which gives engraving somewhere to sit. Down to $3.53 at volume, which is where this stops being a cost.

4

Employee Recognition & Service Awards

Recognition fails when the object does not match the words. If you are marking five or ten years of someone's working life, the piece has to carry weight. Literally and otherwise. Personalization with the individual's name is what converts a company gift into a personal keepsake, and it is the single highest-leverage decision in a recognition program. Buy for coverage. The arithmetic rewards it and the budget will not notice.

5

Nonprofit & Fundraising

Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Donors read the gift as a statement about stewardship. Something visibly expensive can cost you more in confidence than it earns in goodwill, which is why restraint and a personal inscription usually outperform scale in this sector. Decoration holds up in this setting, which is where cheaper substrates fail. At $5.70 before breaks it is cheap enough to hand out without counting.

6

Education, Schools & Universities

Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. An imprint area of 2.75 in x 4.5 in is enough for a logo and a line of text without crowding. The unit cost here is low enough that reach matters more than restraint.

How does ordering and turnaround work?

Minimum order1 piece
SetupFree on every order, at any quantity
FreightFree ground freight on every order over $250; split shipping to individual addresses available
Rush serviceWorking to a date? Ask and we will confirm what is genuinely possible, priced up front
ProofingProof back to you next business day, and nothing runs until you approve it
Re-ordersWe keep the approved file, so a re-order reproduces it exactly
ShippingFree ground freight on every order over $250; split shipping to individual addresses available

What do buyers ask about VAL746?

How long does production take?

Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. The clock starts when you approve the proof, not when you place the order. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. A rush is quoted per job, with the date confirmed in writing before you pay.

What happens if something arrives damaged?

We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.

How should this be cared for?

Dust with a dry cloth. Keep out of direct sun and away from radiators. VAL746 measures 4 1/4" x 6" and is made of walnut. Walnut is the darkest of the common domestic hardwoods, which gives engraving somewhere to sit.

Do you ship to multiple addresses?

Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.

Is there a setup charge?

There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.

Can I get a sample before committing?

Yes: order one piece. VAL746 sells from a single unit at $5.70, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.

Can I mix colors or sizes to reach a quantity break?

Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on VAL746 runs from $5.70 a piece at 1-11 down to $3.53 at 500+, about 38% less per piece.

What is the minimum order for VAL746?

There is no minimum beyond one piece on VAL746. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on VAL746 runs from $5.70 a piece at 1-11 down to $3.53 at 500+, about 38% less per piece.

See it with your logo first

Send us your artwork and we will produce a free digital proof of VAL746 decorated with your mark. Usually within one business day, with no obligation and no account required.

Get a free proof

More from this range

People also considered

Same decision, different trade-off.

4 1/4" x 6" Value Walnut Finish Plaque with 45 Degree Bevel Black EdgeItem VAL746 · free proof, full refund until you approve
$3.53