Free setup · Free digital proof · Free freight over $250
orders@goldstarsupply.com · Mon-Fri 8am-6pm ET
Bamboo Lasered Leatherette Coaster with Bottle Opener
Leatherette

Bamboo Lasered Leatherette Coaster with Bottle Opener

Item GFT1242 · 4" x 4" · Desk & Office

Bamboo Lasered Leatherette Coaster with Bottle Opener (item GFT1242) is in our Coasters range of Desk & Office, with a 3.2 in x 2.8 in personalization area. At 48 pieces it costs $10.20 each all-in: $5.20 for the piece plus $5.00 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.

Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of ground transit. It holds if your artwork is with us today and you approve the proof within one business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21. We promise the late end, because a date is worth nothing if we miss it.
$4.03 each at 500+ · $6.50 at 1
QuantityPrice eachYou save
1-11$6.50 -
12-23$5.98 save 8%
24-47$5.59 save 14%
48-95$5.20 save 20%
96-249$4.81 save 26%
250-499$4.42 save 32%
500+$4.03 save 38%
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)

Sold loose or by the case of 6. Ask us if you want a full case: we will check the case price for you.

See your logo on it

Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 3.2in x 2.8in.

Or have us spec it →
Included at no extra charge
  • No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
  • Free digital proof before anything is produced
  • Free artwork check at the real imprint size
  • Free ground freight on orders over $250
  • Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and shown in full before you pay, never added afterwards.

What is the Bamboo Lasered Leatherette Coaster with Bottle Opener?

A leatherette pen, catalogued here as GFT1242. The substrate was picked for decoration quality first and appearance second, which is the right order. It measures 4" x 4".

In practice: leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges..

This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off. Pens circulate: they get borrowed and not returned, which for a promotional item is a feature.

Giveaway pricing, which changes how you should think about quantity. Running short at a booth costs more in missed conversations than the extra units would have cost to print. Concretely: $6.50 each at 1-11, $4.03 at 500+.

Specifications

Item numberGFT1242
Product typePen
MaterialLeatherette
Dimensions4" x 4"
Shipping weight3 oz
ColorBamboo
Decoration methodsLaser Engraving, Debossing, UV Printing
Standard imprint area3.2 in x 2.8 in
Minimum order1 piece
DurabilityHigh for everyday carry.
CareWipe clean with a damp cloth. Do not soak or machine wash.
CategoryDesk & Office
CollectionCoasters

Decoration options

The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 3.2 in x 2.8 in.

Laser Engraving

A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.

Best for

Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.

Color

Single color: the natural color of the material under the surface.

Debossing

A heated die presses the artwork into the material. A subtle, tactile, recessed impression in the surface color.

Best for

Leather and leatherette gifts where understatement is the point.

Color

Blind (no color) or foil-filled.

UV Printing

UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.

Best for

Multi-color logos, gradients, photographs and exact brand-color matching.

Color

Full color, including white ink on dark substrates.

Artwork requirements

  • Artwork we redraw stays on file under your item number, so the next order runs from the same corrected file.
  • Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
  • Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
  • Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
  • Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
  • Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.

Production schedule

Artwork proof1 business day from receipt of usable art
Standard production3 to 5 business days after proof approval
Rush productionquoted per job, with the date confirmed in writing before you pay
Ground transit1 to 5 business days depending on destination

Common uses

Conference kitsBuilt for conference kits. That is the use case the format was designed around, not one retrofitted to it.
Reception and counter giveawaysA natural fit for reception and counter giveaways, which is one of the settings this pen was specified for.
Direct mailDirect mail is where this earns its cost, and where buyers re-order it.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Customer loyalty tiersA physical marker of status that an account dashboard cannot replicate.
Remote team welcome kitsShipped to a home address, which for a distributed team is the only physical touch the company gets.
Internal contests and incentivesA tangible prize outperforms a gift card for exactly the reason you would expect. It stays on the desk.

Where this works best

The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.

1

Healthcare & Senior Living

Healthcare buyers screen for practicality and hygiene before they screen for design. Easy-clean surfaces, no small detachable parts, and legible large-format personalization all matter. Staff appreciation is a genuine retention lever in this sector, and a good piece of drinkware or desk recognition costs a fraction of replacing a nurse. Decoration holds up in this setting, which is where cheaper substrates fail. At this price the risk is under-ordering, not over-ordering.

2

Education, Schools & Universities

Education buys in waves: orientation, homecoming, graduation, staff appreciation. Departments buy separately even when the brand is shared, which is how a university ends up with nine versions of its own crest. A single approved item list with locked artwork solves more than any individual purchasing decision will. An imprint area of 3.2 in x 2.8 in is enough for a logo and a line of text without crowding. Down to $4.03 at volume, which is where this stops being a cost.

3

Franchise & Multi-Location Brands

The hard problem in multi-location branding is consistency, not creativity. Artwork drift is cumulative and invisible until it is severe. A locked file held centrally against each item number, rather than a logo emailed between locations, is what stops forty sites gradually producing forty logos. Buy for coverage. The arithmetic rewards it and the budget will not notice.

4

Trade Shows & Conferences

Booth traffic is not the metric: what leaves the hall and stays in use is. Run a two-tier giveaway: a low-cost item for everyone who stops, and a genuinely good piece reserved for qualified conversations. The second tier is what people remember when your follow-up email arrives a week later. At $6.50 before breaks it is cheap enough to hand out without counting.

5

Financial Services, Insurance & Legal

Professional services sell trust, and the gift has to look like the invoice. Compliance shapes the purchase more than taste does. Many institutions cap the value of a client gift and require it to be logged, which pushes this segment toward pieces that read as considered rather than expensive. Minimum order is a single piece, which suits how this segment tends to buy. The unit cost here is low enough that reach matters more than restraint.

How does ordering and turnaround work?

Minimum order1 piece
SetupFree on every order, at any quantity
FreightFree ground freight on every order over $250; split shipping to individual addresses available
Rush serviceRush is quoted per job, with the date confirmed in writing before payment
ProofingProof back to you next business day, and nothing runs until you approve it
Re-ordersArtwork kept on file so re-orders run fast and match
ShippingFree ground freight on every order over $250; split shipping to individual addresses available

What do buyers ask about GFT1242?

Is there a setup charge?

There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.

Can I see a proof before you produce the order?

Always, and we do not start without written approval. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. Once approved, the proof becomes the specification for the run, so check the spelling and the placement carefully. The personalization area on GFT1242 is 3.2 in x 2.8 in.

What if the artwork does not fit the imprint area?

The personalization area on GFT1242 is 3.2 in x 2.8 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.

How long does production take?

Door to door at standard speed: a day for the proof, 3 to 5 business days in production, then 1 to 5 business days in transit. A rush is quoted per job, with the date confirmed in writing before you pay.

Can I order more later and have them match?

Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on GFT1242 runs from $6.50 a piece at 1-11 down to $4.03 at 500+, about 38% less per piece.

What happens if something arrives damaged?

We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.

Can I mix colors or sizes to reach a quantity break?

Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on GFT1242 runs from $6.50 a piece at 1-11 down to $4.03 at 500+, about 38% less per piece.

What is the minimum order for GFT1242?

There is no minimum beyond one piece on GFT1242. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on GFT1242 runs from $6.50 a piece at 1-11 down to $4.03 at 500+, about 38% less per piece.

See it with your logo first

Send us your artwork and we will produce a free digital proof of GFT1242 decorated with your mark. Usually within one business day, with no obligation and no account required.

Get a free proof

People also considered

Same decision, different trade-off.

Bamboo Lasered Leatherette Coaster with Bottle OpenerItem GFT1242 · free proof, full refund until you approve
$4.03

What GFT1242 costs at each quantity

The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.

QuantityPieceEngraving All-in eachOrder totalGround freight
48 $5.20 $5.00 $10.20 $489.60 Free
96 $4.81 $4.75 $9.56 $917.76 Free
  • Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
  • The personalization area is 3.2 in by 2.8 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
  • At 50 pieces this costs less than 89% of the 541 other priced items in Desk & Office.
  • The table starts at 48 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
  • Setup is free at every quantity, including 48.