Light Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1046
$4.18 ea at volume, blank
plus $1.75 each to engrave
Other options in this range
Stainless Steel
2 oz
Black/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Black/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass (item GFT1051) is in our Leatherette Flasks range of Barware, with a 1.4 in x 1.66 in personalization area. At 48 pieces it costs $7.90 each all-in: $5.40 for the piece plus $2.50 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$4.18
each at 500+ · $6.75 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $6.75 | - |
| 12-23 | $6.21 | save 8% |
| 24-47 | $5.81 | save 14% |
| 48-95 | $5.40 | save 20% |
| 96-249 | $5.00 | save 26% |
| 250-499 | $4.59 | save 32% |
| 500+ | $4.18 | save 38% |
✓ 915 in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.4in x 1.66in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Black/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass?
Black/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass (GFT1051): a shot glass at 2 oz where 18/8 food-grade stainless steel with a double-wall vacuum-insulated construction and a powder-coated exterior does most of the work. It measures 1 3/4"(L) x 1 3/4"(W) x 2 3/8"(H). This is the black colorway, one of 2 in the range.
Worth knowing before you order: the vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. The outer wall never sweats, so it will not leave rings on a conference table or slip out of a hand on a job site.
Low unit cost with a genuinely high keep-rate: shot glasses get collected rather than discarded. On this substrate specifically: the powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does.
This is table-stock: priced to be handed out freely. The metric that matters is how many you can put into circulation, not what each one felt like to give. Concretely: $6.75 each at 1-11, $4.18 at 500+.
Specifications
| Item number | GFT1051 |
|---|---|
| Product type | Shot Glass |
| Material | Stainless Steel |
| Capacity | 2 oz |
| Dimensions | 1 3/4"(L) x 1 3/4"(W) x 2 3/8"(H) |
| Shipping weight | 1 oz |
| Color | Black, Silver |
| Decoration methods | Laser Engraving, UV Printing, Color Fill |
| Standard imprint area | 1.4 in x 1.66 in |
| Minimum order | 1 piece |
| Durability | Very high: realistically a multi-year item. |
| Care | Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. |
| Category | Barware |
| Collection | Leatherette Flasks |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.4 in x 1.66 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Color Fill
Engraved or carved recesses are filled with pigment. A permanent engraved mark that reads in brand color rather than substrate color.
Best for
Metal and crystal where the logo must be recognisably on-brand.
Color
Matched to Pantone where the recess allows.
Artwork requirements
- Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
- A digital proof comes back to you first, every time. Production starts on your written approval and not before.
- Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
- If the logo is only available as a bitmap, we need it at 300 dpi or better at final size, ideally on a transparent background.
- Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
Production schedule
| Proof to you | Within one business day of usable artwork arriving |
|---|---|
| Production, standard | 3 to 5 business days, counted from your approval |
| Production, rush | quoted per job, confirmed in writing before you pay |
| Transit by ground | 1 to 5 business days, by distance from the shipping point |
Common uses
Bar and venue merchandiseBar and venue merchandise is where this earns its cost, and where buyers re-order it.
Tourism retailBuilt for tourism retail. That is the use case the format was designed around, not one retrofitted to it.
Event favorsWorks well for event favors, where the shot glass format does what a printed handout cannot.
Safety and quality milestonesMarking a record that took every person on the floor to achieve, with something they can point at.
Community and civic eventsLocal sponsorships and volunteer thanks, where visible presence matters more than volume.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Employee milestonesAnniversaries, promotions and retirements: the moments where a personalized object does what an email cannot.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Weddings, Reunions & Milestone Events
Personal events are the one segment where the recipient genuinely wants the item personalized. Names, dates and short inscriptions turn an ordinary object into something kept for decades. Quantities are modest and lead times are unforgiving, which makes production scheduling the thing to get right. Buy for coverage. The arithmetic rewards it and the budget will not notice.
2
Trade Shows & Conferences
Booth traffic is not the metric: what leaves the hall and stays in use is. Weight and packability decide what actually leaves the hall. Anything bulky ends up in a hotel bin regardless of quality, so the constraint is what fits in a carry-on alongside everything else collected that day. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. At $6.75 before breaks it is cheap enough to hand out without counting.
3
Hospitality, Restaurants & Breweries
In hospitality the promotional item and the retail item are the same object. Seasonality drives the order pattern. Terraces, patios and outdoor service create demand for a different specification than winter trade does, so most venues need two lists rather than one annual order. The unit cost here is low enough that reach matters more than restraint.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about GFT1051?
How is this decorated?
Laser Engraving is the primary method on GFT1051. A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved. We can also run UV Printing and Color Fill on this item if the artwork calls for it. The personalization area on GFT1051 is 1.4 in x 1.66 in.
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
What if the artwork does not fit the imprint area?
The personalization area on GFT1051 is 1.4 in x 1.66 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
Can I mix colors or sizes to reach a quantity break?
Yes. GFT1051 runs in 2 colors and they combine for pricing, as long as the artwork does not change between them. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+.
What happens if something arrives damaged?
Tell us within 10 days of delivery and we replace it. Note any damage on the freight bill before you sign for it, because that is what the carrier claim turns on. Resolving it with the carrier is our job, not yours. The replacement runs from the artwork you already approved, so it matches the rest of the order.
What artwork do you need from me?
Send vector if it exists, raster at 300 dpi if it does not, and whatever you have if neither. The personalization area on GFT1051 is 1.4 in x 1.66 in, and we redraw or re-proportion anything that will not survive it. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
Do you ship to multiple addresses?
Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.
What is the minimum order for GFT1051?
There is no minimum beyond one piece on GFT1051. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on GFT1051 runs from $6.75 a piece at 1-11 down to $4.18 at 500+, about 38% less per piece.
See it with your logo first
Send us your artwork and we will produce a free digital proof of GFT1051 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
Dark Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1047
$4.18 ea at volume, blank
plus $1.75 each to engrave
Rawhide 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1048
$4.18 ea at volume, blank
plus $1.75 each to engrave
Gray 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1049
$4.18 ea at volume, blank
plus $1.75 each to engrave
Pink 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1050
$4.18 ea at volume, blank
plus $1.75 each to engrave
Rustic/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1052
$4.18 ea at volume, blank
plus $1.75 each to engrave
Blue/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1053
$4.18 ea at volume, blank
plus $1.75 each to engrave
Teal 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1054
$4.18 ea at volume, blank
plus $1.75 each to engrave
People also considered
Same decision, different trade-off.
Bamboo 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1055
$4.18 ea at volume, blank
plus $1.75 each to engrave
12 oz. Polar Camel Square Double Old Fashioned Glass
Item PCG119
$4.18 ea at volume
Light Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1046
$4.18 ea at volume, blank
plus $1.75 each to engrave
Dark Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1047
$4.18 ea at volume, blank
plus $1.75 each to engrave
Rawhide 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1048
$4.18 ea at volume, blank
plus $1.75 each to engrave
Gray 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1049
$4.18 ea at volume, blank
plus $1.75 each to engrave
Black/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot GlassItem GFT1051 · free proof, full refund until you approve
$4.18
What GFT1051 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $6.21 | $4.50 | $10.71 | $128.52 | Priced by weight |
| 24 | $5.81 | $3.25 | $9.06 | $217.44 | Priced by weight |
| 48 | $5.40 | $2.50 | $7.90 | $379.20 | Free |
| 96 | $5.00 | $2.25 | $7.25 | $696.00 | Free |
| 250 | $4.59 | $2.00 | $6.59 | $1,647.50 | Free |
| 500 | $4.18 | $1.75 | $5.93 | $2,965.00 | Free |
- Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.4 in by 1.66 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 86% of the 170 other priced items in Barware.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.