Light Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1046
$4.18 ea at volume, blank
plus $1.75 each to engrave
Other options in this range
Stainless Steel
2 oz
Teal 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Teal 2 oz. Leatherette Wrapped Stainless Steel Shot Glass (item GFT1054) is in our Leatherette Flasks range of Barware, with a 1.4 in x 1.66 in personalization area. At 48 pieces it costs $7.90 each all-in: $5.40 for the piece plus $2.50 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$4.18
each at 500+ · $6.75 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $6.75 | - |
| 12-23 | $6.21 | save 8% |
| 24-47 | $5.81 | save 14% |
| 48-95 | $5.40 | save 20% |
| 96-249 | $5.00 | save 26% |
| 250-499 | $4.59 | save 32% |
| 500+ | $4.18 | save 38% |
✓ 827 in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.4in x 1.66in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Teal 2 oz. Leatherette Wrapped Stainless Steel Shot Glass?
Item GFT1054 is a shot glass at 2 oz in stainless steel, chosen for how well it takes a mark and how long that mark lasts. It measures 1 3/4"(L) x 1 3/4"(W) x 2 3/8"(H). This is the teal colorway.
In practice: the vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. The outer wall never sweats, so it will not leave rings on a conference table or slip out of a hand on a job site.
Low unit cost with a genuinely high keep-rate: shot glasses get collected rather than discarded. On this substrate specifically: the powder coat is the reason this decorates so well. A CO2 or fiber laser burns the coating away and exposes bright stainless underneath, producing a permanent, high-contrast mark that cannot peel, fade in a dishwasher, or wear off in a cup holder the way a printed logo does.
Giveaway pricing, which changes how you should think about quantity. Running short at a booth costs more in missed conversations than the extra units would have cost to print. Concretely: $6.75 each at 1-11, $4.18 at 500+.
Specifications
| Item number | GFT1054 |
|---|---|
| Product type | Shot Glass |
| Material | Stainless Steel |
| Capacity | 2 oz |
| Dimensions | 1 3/4"(L) x 1 3/4"(W) x 2 3/8"(H) |
| Shipping weight | 1 oz |
| Color | Teal |
| Decoration methods | Laser Engraving, UV Printing, Color Fill |
| Standard imprint area | 1.4 in x 1.66 in |
| Minimum order | 1 piece |
| Durability | Very high: realistically a multi-year item. |
| Care | Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. |
| Category | Barware |
| Collection | Leatherette Flasks |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.4 in x 1.66 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Color Fill
Engraved or carved recesses are filled with pigment. A permanent engraved mark that reads in brand color rather than substrate color.
Best for
Metal and crystal where the logo must be recognisably on-brand.
Color
Matched to Pantone where the recess allows.
Artwork requirements
- Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
- A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.
- A digital proof comes back to you first, every time. Production starts on your written approval and not before.
- Type should be converted to curves or outlines, otherwise a missing font silently substitutes on our end.
- Convert all type to outlines so fonts do not substitute in production.
Production schedule
| Proof to you | Within one business day of usable artwork arriving |
|---|---|
| Production, standard | 3 to 5 business days, counted from your approval |
| Production, rush | quoted per job, confirmed in writing before you pay |
| Transit by ground | 1 to 5 business days, by distance from the shipping point |
Common uses
Bar and venue merchandiseWorks well for bar and venue merchandise, where the shot glass format does what a printed handout cannot.
Tourism retailBuilt for tourism retail. That is the use case the format was designed around, not one retrofitted to it.
Event favorsWorks well for event favors, where the shot glass format does what a printed handout cannot.
Safety and quality milestonesMarking a record that took every person on the floor to achieve, with something they can point at.
Fundraising and donor recognitionThanking the people who gave, in a form that quietly encourages the next person to.
Internal contests and incentivesA tangible prize outperforms a gift card for exactly the reason you would expect. It stays on the desk.
Community and civic eventsLocal sponsorships and volunteer thanks, where visible presence matters more than volume.
Team and department awardsRecognizing a group without the cost or ceremony of individual crystal for every person.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Weddings, Reunions & Milestone Events
Personal events are the one segment where the recipient genuinely wants the item personalized. Guests keep what they can use and discard what merely commemorates. An item that works on an ordinary Tuesday will outlive the event by years; one that only makes sense on the day will not survive the drive home. The shot glass format earns its place here on keep-rate rather than headline price. Order deep. At this price the waste of a few extra is cheaper than running short.
2
Trade Shows & Conferences
Booth traffic is not the metric: what leaves the hall and stays in use is. Run a two-tier giveaway: a low-cost item for everyone who stops, and a genuinely good piece reserved for qualified conversations. The second tier is what people remember when your follow-up email arrives a week later. Volume is the point at $6.75; nobody is auditing this line item.
3
Hospitality, Restaurants & Breweries
In hospitality the promotional item and the retail item are the same object. Breakage and theft are line items, not accidents. Popular branded glassware walks out of a venue at a predictable rate, and the sensible response is to price it for retail rather than to fight it. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level. Cost per impression is the number that matters here, and it is very low.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free, from one piece to five hundred |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Rush available: tell us the date and we confirm it in writing before you pay |
| Proofing | One business day to proof, then production starts the moment you sign off |
| Re-orders | We keep the approved file, so a re-order reproduces it exactly |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about GFT1054?
Can I mix colors or sizes to reach a quantity break?
Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on GFT1054 runs from $6.75 a piece at 1-11 down to $4.18 at 500+, about 38% less per piece.
What artwork do you need from me?
Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 1.4 in x 1.66 in personalization area and tell you before you pay whether it holds up at that size.
How should this be cared for?
Hand wash recommended to protect the powder coat and the vacuum seal. Do not microwave, freeze, or use abrasive cleaners. GFT1054 measures 1 3/4"(L) x 1 3/4"(W) x 2 3/8"(H) and is made of stainless steel. The vacuum layer between the walls is what does the work: it removes the air that would otherwise carry heat, so cold drinks stay cold roughly 24 hours and hot drinks stay hot 6 to 8 hours depending on size and fill level.
Can you work to a fixed in-hand date?
Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.
Is there a setup charge?
No. Setup is free on every order at every quantity. Art preparation, machine setup and your digital proof are built into the price, with nothing added for them later. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
What happens if something arrives damaged?
Tell us within 10 days of delivery and we replace it. Note any damage on the freight bill before you sign for it, because that is what the carrier claim turns on. Resolving it with the carrier is our job, not yours. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Can I see a proof before you produce the order?
Always, and we do not start without written approval. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. Once approved, the proof becomes the specification for the run, so check the spelling and the placement carefully. The personalization area on GFT1054 is 1.4 in x 1.66 in.
What is the minimum order for GFT1054?
GFT1054 can be ordered from a single piece. The published ladder on GFT1054 runs from $6.75 a piece at 1-11 down to $4.18 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on GFT1054 is 1.4 in x 1.66 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of GFT1054 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
Dark Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1047
$4.18 ea at volume, blank
plus $1.75 each to engrave
Rawhide 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1048
$4.18 ea at volume, blank
plus $1.75 each to engrave
Gray 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1049
$4.18 ea at volume, blank
plus $1.75 each to engrave
Pink 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1050
$4.18 ea at volume, blank
plus $1.75 each to engrave
Black/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1051
$4.18 ea at volume, blank
plus $1.75 each to engrave
Rustic/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1052
$4.18 ea at volume, blank
plus $1.75 each to engrave
Blue/Silver 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1053
$4.18 ea at volume, blank
plus $1.75 each to engrave
People also considered
Same decision, different trade-off.
Bamboo 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1055
$4.18 ea at volume, blank
plus $1.75 each to engrave
12 oz. Polar Camel Square Double Old Fashioned Glass
Item PCG119
$4.18 ea at volume
Light Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1046
$4.18 ea at volume, blank
plus $1.75 each to engrave
Dark Brown 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1047
$4.18 ea at volume, blank
plus $1.75 each to engrave
Rawhide 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1048
$4.18 ea at volume, blank
plus $1.75 each to engrave
Gray 2 oz. Leatherette Wrapped Stainless Steel Shot Glass
Item GFT1049
$4.18 ea at volume, blank
plus $1.75 each to engrave
Teal 2 oz. Leatherette Wrapped Stainless Steel Shot GlassItem GFT1054 · free proof, full refund until you approve
$4.18
What GFT1054 costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $6.21 | $4.50 | $10.71 | $128.52 | Priced by weight |
| 24 | $5.81 | $3.25 | $9.06 | $217.44 | Priced by weight |
| 48 | $5.40 | $2.50 | $7.90 | $379.20 | Free |
| 96 | $5.00 | $2.25 | $7.25 | $696.00 | Free |
| 250 | $4.59 | $2.00 | $6.59 | $1,647.50 | Free |
| 500 | $4.18 | $1.75 | $5.93 | $2,965.00 | Free |
- Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.4 in by 1.66 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 86% of the 170 other priced items in Barware.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.