Free setup · Free digital proof · Free freight over $250
orders@goldstarsupply.com · Mon-Fri 8am-6pm ET
Square Red Laserable Leatherette Bottle Opener Coaster
Leatherette

Square Red Laserable Leatherette Bottle Opener Coaster

Item GFT1243 · 4" x 4" · Desk & Office

Square Red Laserable Leatherette Bottle Opener Coaster (item GFT1243) is in our Coasters range of Desk & Office, with a 3.2 in x 2.8 in personalization area. At 48 pieces it costs $10.20 each all-in: $5.20 for the piece plus $5.00 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.

Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of ground transit. It holds if your artwork is with us today and you approve the proof within one business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21. We promise the late end, because a date is worth nothing if we miss it.
$4.03 each at 500+ · $6.50 at 1
QuantityPrice eachYou save
1-11$6.50 -
12-23$5.98 save 8%
24-47$5.59 save 14%
48-95$5.20 save 20%
96-249$4.81 save 26%
250-499$4.42 save 32%
500+$4.03 save 38%
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)

Sold loose or by the case of 6. Ask us if you want a full case: we will check the case price for you.

See your logo on it

Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 3.2in x 2.8in.

Or have us spec it →
Included at no extra charge
  • No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
  • Free digital proof before anything is produced
  • Free artwork check at the real imprint size
  • Free ground freight on orders over $250
  • Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and shown in full before you pay, never added afterwards.

What is the Square Red Laserable Leatherette Bottle Opener Coaster?

This is a pen in leatherette. Straightforward to decorate, and durable enough that the decoration outlasts the occasion. It measures 4" x 4". This is the red colorway.

Worth knowing before you order: leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges..

Pens circulate: they get borrowed and not returned, which for a promotional item is a feature. This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off. The two together are why this item re-orders.

This sits in the giveaway tier, where the job is reach: enough units to hand one to everyone who walks past the table, at a cost per impression low enough that nobody has to justify it line by line. Concretely: $6.50 each at 1-11, $4.03 at 500+.

Specifications

Item numberGFT1243
Product typePen
MaterialLeatherette
Dimensions4" x 4"
Shipping weight3 oz
ColorRed
Decoration methodsLaser Engraving, Debossing, UV Printing
Standard imprint area3.2 in x 2.8 in
Minimum order1 piece
DurabilityHigh for everyday carry.
CareWipe clean with a damp cloth. Do not soak or machine wash.
CategoryDesk & Office
CollectionCoasters

Decoration options

The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 3.2 in x 2.8 in.

Laser Engraving

A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.

Best for

Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.

Color

Single color: the natural color of the material under the surface.

Debossing

A heated die presses the artwork into the material. A subtle, tactile, recessed impression in the surface color.

Best for

Leather and leatherette gifts where understatement is the point.

Color

Blind (no color) or foil-filled.

UV Printing

UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.

Best for

Multi-color logos, gradients, photographs and exact brand-color matching.

Color

Full color, including white ink on dark substrates.

Artwork requirements

  • We send a digital proof for written approval before production starts. Nothing goes on a machine until you sign it off.
  • Send vector if you have it. A .ai, .eps, .pdf or .svg scales to any imprint without softening.
  • Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
  • Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
  • Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
  • Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.

Production schedule

Digital proofSame or next business day
Standard run3 to 5 business days once the proof is signed off
Rush runquoted per job once the proof is signed off, with the date confirmed in writing
Delivery1 to 5 business days on the ground network

Common uses

Conference kitsConference kits is where this earns its cost, and where buyers re-order it.
Reception and counter giveawaysA natural fit for reception and counter giveaways, which is one of the settings this pen was specified for.
Direct mailSpecified regularly for direct mail. The imprint area at 3.2 in x 2.8 in is sized for exactly that job.
Customer loyalty tiersA physical marker of status that an account dashboard cannot replicate.
Sponsorship and partner thanksGiven to the people who funded or enabled the work, in a form they can keep visible.
Client thank-you programsSent after a renewal, a referral or a project close, when the relationship is warm and the gesture will land.
Event and conference giftingHanded to qualified conversations rather than to everyone, so the spend goes where the pipeline is.

Where this works best

The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.

1

Financial Services, Insurance & Legal

Professional services sell trust, and the gift has to look like the invoice. The gift is often opened in front of colleagues, so it is judged as a signal about the relationship rather than as an object. Understatement is the safe default, and a name engraved properly does more than any material upgrade. This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off. The unit cost here is low enough that reach matters more than restraint.

2

Healthcare & Senior Living

Healthcare buyers screen for practicality and hygiene before they screen for design. Easy-clean surfaces, no small detachable parts, and legible large-format personalization all matter. Staff appreciation is a genuine retention lever in this sector, and a good piece of drinkware or desk recognition costs a fraction of replacing a nurse. The pen format earns its place here on keep-rate rather than headline price. Order deep. At this price the waste of a few extra is cheaper than running short.

3

Education, Schools & Universities

Education buys in waves: orientation, homecoming, graduation, staff appreciation. Departments buy separately even when the brand is shared, which is how a university ends up with nine versions of its own crest. A single approved item list with locked artwork solves more than any individual purchasing decision will. Volume is the point at $6.50; nobody is auditing this line item.

4

Franchise & Multi-Location Brands

The hard problem in multi-location branding is consistency, not creativity. Artwork drift is cumulative and invisible until it is severe. A locked file held centrally against each item number, rather than a logo emailed between locations, is what stops forty sites gradually producing forty logos. Leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges.. Cost per impression is the number that matters here, and it is very low.

5

Trade Shows & Conferences

Booth traffic is not the metric: what leaves the hall and stays in use is. Run a two-tier giveaway: a low-cost item for everyone who stops, and a genuinely good piece reserved for qualified conversations. The second tier is what people remember when your follow-up email arrives a week later. Cheap enough to over-order slightly, which is the right call for a table.

How does ordering and turnaround work?

Minimum order1 piece
SetupFree, from one piece to five hundred
FreightOrders over $250 ship free by ground; individual address splits available on request
Rush serviceWorking to a date? Ask and we will confirm what is genuinely possible, priced up front
ProofingOne business day to proof, then production starts the moment you sign off
Re-ordersWe keep the approved file, so a re-order reproduces it exactly
ShippingOrders over $250 ship free by ground; individual address splits available on request

What do buyers ask about GFT1243?

Can I order more later and have them match?

Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on GFT1243 runs from $6.50 a piece at 1-11 down to $4.03 at 500+, about 38% less per piece.

Is there a setup charge?

No. Setup is free on every order at every quantity. Art preparation, machine setup and your digital proof are built into the price, with nothing added for them later. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.

Can I see a proof before you produce the order?

Yes, and nothing runs until you have signed it off. Read it properly rather than skimming, because the approved proof is the specification we produce against. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.

How should this be cared for?

Wipe clean with a damp cloth. Do not soak or machine wash. GFT1243 measures 4" x 4" and is made of leatherette. Leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges.

Do you ship to multiple addresses?

Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.

What does it actually cost at quantity?

The published ladder on GFT1243 runs from $6.50 a piece at 1-11 down to $4.03 at 500+, about 38% less per piece. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.

Can I mix colors or sizes to reach a quantity break?

Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on GFT1243 runs from $6.50 a piece at 1-11 down to $4.03 at 500+, about 38% less per piece.

What is the minimum order for GFT1243?

There is no minimum beyond one piece on GFT1243. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on GFT1243 runs from $6.50 a piece at 1-11 down to $4.03 at 500+, about 38% less per piece.

See it with your logo first

Send us your artwork and we will produce a free digital proof of GFT1243 decorated with your mark. Usually within one business day, with no obligation and no account required.

Get a free proof

People also considered

Same decision, different trade-off.

Square Red Laserable Leatherette Bottle Opener CoasterItem GFT1243 · free proof, full refund until you approve
$4.03

What GFT1243 costs at each quantity

The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.

QuantityPieceEngraving All-in eachOrder totalGround freight
48 $5.20 $5.00 $10.20 $489.60 Free
96 $4.81 $4.75 $9.56 $917.76 Free
  • Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
  • The personalization area is 3.2 in by 2.8 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
  • At 50 pieces this costs less than 89% of the 541 other priced items in Desk & Office.
  • The table starts at 48 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
  • Setup is free at every quantity, including 48.