Victory 2" Insert Holder Medal-Antique Bronze (Insert Not Included)
Item HR934B
$2.73 ea at volume, blank
plus $1.75 each to engrave
Other options in this range
Zinc Alloy
Victory 2" Insert Holder Medal-Antique Gold (Insert Not Included)
Victory 2" Insert Holder Medal-Antique Gold (Insert Not Included) (item HR934G) is in our Insert Holder Medals range of Awards & Recognition, with a 1.65 in x 1.24 in personalization area. At 48 pieces it costs $6.02 each all-in: $3.52 for the piece plus $2.50 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.73
each at 500+ · $4.40 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $4.40 | - |
| 12-23 | $4.05 | save 8% |
| 24-47 | $3.78 | save 14% |
| 48-95 | $3.52 | save 20% |
| 96-249 | $3.26 | save 26% |
| 250-499 | $2.99 | save 32% |
| 500+ | $2.73 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.65in x 1.24in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Victory 2" Insert Holder Medal-Antique Gold (Insert Not Included)?
This medal is made from die-cast zinc alloy with a plated finish. It measures 2 3/4". This is the gold colorway.
In practice: die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed. Plating then sets the finish. Gold, silver or bronze.
Medals scale to hundreds of recipients at a cost per person that no other award form matches. On this substrate specifically: artwork is struck into the die, or applied as a printed or sublimated insert set into the recess.
This sits in the giveaway tier, where the job is reach: enough units to hand one to everyone who walks past the table, at a cost per impression low enough that nobody has to justify it line by line. Concretely: $4.40 each at 1-11, $2.73 at 500+.
Specifications
| Item number | HR934G |
|---|---|
| Product type | Medal |
| Material | Zinc Alloy |
| Dimensions | 2 3/4" |
| Height | 2 3/4" |
| Shipping weight | 1 oz |
| Color | Gold |
| Decoration methods | Die Struck, Printed Insert, Laser Engraving (back) |
| Standard imprint area | 1.65 in x 1.24 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. |
| Category | Awards & Recognition |
| Collection | Insert Holder Medals |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.65 in x 1.24 in.
Die Struck
The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal.
Best for
Medals, coins and lapel pins.
Color
Metal finish, optionally enamel-filled.
Printed Insert
A printed or sublimated disc is set into the recess of the piece. Full-color artwork inside a cast metal frame.
Best for
Medals and emblem holders where color is required.
Color
Full color.
Laser Engraving (back)
The reverse face is laser engraved. Personalization without disturbing the struck front face.
Best for
Medals with a standard front and individual backs.
Color
Substrate color.
Artwork requirements
- Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
- Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
- Convert all type to outlines so fonts do not substitute in production.
- A digital proof comes back to you first, every time. Production starts on your written approval and not before.
- If the logo is only available as a bitmap, we need it at 300 dpi or better at final size, ideally on a transparent background.
Production schedule
| Proof to you | Within one business day of usable artwork arriving |
|---|---|
| Production, standard | 3 to 5 business days, counted from your approval |
| Production, rush | quoted per job, confirmed in writing before you pay |
| Transit by ground | 1 to 5 business days, by distance from the shipping point |
Common uses
Races and tournamentsRaces and tournaments is where this earns its cost, and where buyers re-order it.
School achievementWorks well for school achievement, where the medal format does what a printed handout cannot.
Participation recognitionA natural fit for participation recognition, which is one of the settings this medal was specified for.
Community and civic eventsLocal sponsorships and volunteer thanks, where visible presence matters more than volume.
Event and conference giftingHanded to qualified conversations rather than to everyone, so the spend goes where the pipeline is.
Client thank-you programsSent after a renewal, a referral or a project close, when the relationship is warm and the gesture will land.
Service anniversariesFive, ten and twenty years. The object marks the span in a way a announcement never manages.
Internal contests and incentivesA tangible prize outperforms a gift card for exactly the reason you would expect. It stays on the desk.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Recognition pieces for major donors and board members are the clearest win: they are relatively few, they are highly personal, and they materially affect renewal. For event merchandise, price the item to sell rather than to give. An imprint area of 1.65 in x 1.24 in is enough for a logo and a line of text without crowding. Buy for coverage. The arithmetic rewards it and the budget will not notice.
2
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. Awards are read as a hierarchy whether or not you intended one. If the participation piece and the champion piece look similar, the champion feels short-changed, and that is remembered longer than the result. At $4.40 before breaks it is cheap enough to hand out without counting.
3
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. The unit cost here is low enough that reach matters more than restraint.
4
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Minimum order is a single piece, which suits how this segment tends to buy. Order deep. At this price the waste of a few extra is cheaper than running short.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free on every order, at any quantity |
| Freight | Free ground freight on every order over $250; split shipping to individual addresses available |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | Digital proof within 1 business day; production begins on written approval |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Free ground freight on every order over $250; split shipping to individual addresses available |
What do buyers ask about HR934G?
Can I see a proof before you produce the order?
Always, and we do not start without written approval. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. Once approved, the proof becomes the specification for the run, so check the spelling and the placement carefully. The personalization area on HR934G is 1.65 in x 1.24 in.
What happens if something arrives damaged?
Tell us within 10 days of delivery and we replace it. Note any damage on the freight bill before you sign for it, because that is what the carrier claim turns on. Resolving it with the carrier is our job, not yours. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Can you work to a fixed in-hand date?
Yes, and it is the right way to brief us. Tell us the date the box has to be open rather than the date you want it shipped, and checkout works the schedule backwards from there. It refuses a date it cannot keep rather than accepting it and missing it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
Can I order more later and have them match?
Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on HR934G runs from $4.40 a piece at 1-11 down to $2.73 at 500+, about 38% less per piece.
How should this be cared for?
Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. HR934G measures 2 3/4" and is made of zinc alloy. Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed.
What if the artwork does not fit the imprint area?
The personalization area on HR934G is 1.65 in x 1.24 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
What does it actually cost at quantity?
The published ladder on HR934G runs from $4.40 a piece at 1-11 down to $2.73 at 500+, about 38% less per piece. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
What is the minimum order for HR934G?
HR934G can be ordered from a single piece. The published ladder on HR934G runs from $4.40 a piece at 1-11 down to $2.73 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on HR934G is 1.65 in x 1.24 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of HR934G decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
People also considered
Same decision, different trade-off.
Wreath 2" Insert Holder Medal-Antique Bronze (Insert Not Included), 2 1/2"
Item HR905B
$2.76 ea at volume, blank
plus $1.00 each to engrave
Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included), 2 1/2"
Item HR905G
$2.76 ea at volume, blank
plus $1.00 each to engrave
Wreath 2" Insert Holder Medal-Antique Silver (Insert Not Included), 2 1/2"
Item HR905S
$2.76 ea at volume, blank
plus $1.00 each to engrave
2" Insert Holder Medal-Bronze/Black (Insert Not Included)
Item HR951B
$2.82 ea at volume, blank
plus $1.75 each to engrave
2" Insert Holder Medal-Gold/Black (Insert Not Included)
Item HR951G
$2.82 ea at volume, blank
plus $1.75 each to engrave
2" Insert Holder Medal-Silver/Black (Insert Not Included)
Item HR951S
$2.82 ea at volume, blank
plus $1.75 each to engrave
Victory 2" Insert Holder Medal-Antique Gold (Insert Not Included)Item HR934G · free proof, full refund until you approve
$2.73
What HR934G costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 24 | $3.78 | $3.25 | $7.03 | $168.72 | Priced by weight |
| 48 | $3.52 | $2.50 | $6.02 | $288.96 | Free |
| 96 | $3.26 | $2.25 | $5.51 | $528.96 | Free |
| 250 | $2.99 | $2.00 | $4.99 | $1,247.50 | Free |
| 500 | $2.73 | $1.75 | $4.48 | $2,240.00 | Free |
- Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.65 in by 1.24 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 80% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 24 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 24.