Wreath 2" Insert Holder Medal-Antique Bronze (Insert Not Included), 2 1/2"
Item HR905B
$2.76 ea at volume, blank
plus $1.00 each to engrave
Other options in this range
Zinc Alloy
Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included), 2 1/2"
Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included), 2 1/2" (item HR905G) is in our Insert Holder Medals range of Awards & Recognition, with a 1.5 in x 1.13 in personalization area. At 48 pieces it costs $5.31 each all-in: $3.56 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$2.76
each at 500+ · $4.45 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $4.45 | - |
| 12-23 | $4.09 | save 8% |
| 24-47 | $3.83 | save 14% |
| 48-95 | $3.56 | save 20% |
| 96-249 | $3.29 | save 26% |
| 250-499 | $3.03 | save 32% |
| 500+ | $2.76 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 100. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 1.5in x 1.13in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included), 2 1/2"?
Catalogued as HR905G, this medal sits in the part of the range that gets re-ordered rather than tried once. It measures 2 1/2". This is the gold colorway.
Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed. Plating then sets the finish. Gold, silver or bronze.
Medals scale to hundreds of recipients at a cost per person that no other award form matches. Artwork is struck into the die, or applied as a printed or sublimated insert set into the recess. The two together are why this item re-orders.
At this level the item is buying attention rather than gratitude. Order enough to be generous with it, because restraint here saves very little and costs reach. Concretely: $4.45 each at 1-11, $2.76 at 500+.
Specifications
| Item number | HR905G |
|---|---|
| Product type | Medal |
| Material | Zinc Alloy |
| Dimensions | 2 1/2" |
| Height | 2 1/2" |
| Shipping weight | 1 oz |
| Color | Gold |
| Decoration methods | Die Struck, Printed Insert, Laser Engraving (back) |
| Standard imprint area | 1.5 in x 1.13 in |
| Minimum order | 1 piece |
| Durability | Very high. |
| Care | Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. |
| Category | Awards & Recognition |
| Collection | Insert Holder Medals |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 1.5 in x 1.13 in.
Die Struck
The design is struck into metal with a custom die. Crisp raised and recessed relief in solid metal.
Best for
Medals, coins and lapel pins.
Color
Metal finish, optionally enamel-filled.
Printed Insert
A printed or sublimated disc is set into the recess of the piece. Full-color artwork inside a cast metal frame.
Best for
Medals and emblem holders where color is required.
Color
Full color.
Laser Engraving (back)
The reverse face is laser engraved. Personalization without disturbing the struck front face.
Best for
Medals with a standard front and individual backs.
Color
Substrate color.
Artwork requirements
- Do not spend a week hunting for the perfect file. Send what exists and we will tell you what is usable.
- Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.
- Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
- A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.
- Type should be converted to curves or outlines, otherwise a missing font silently substitutes on our end.
Production schedule
| Digital proof | Same or next business day |
|---|---|
| Standard run | 3 to 5 business days once the proof is signed off |
| Rush run | quoted per job once the proof is signed off, with the date confirmed in writing |
| Delivery | 1 to 5 business days on the ground network |
Common uses
Races and tournamentsA natural fit for races and tournaments, which is one of the settings this medal was specified for.
School achievementA natural fit for school achievement, which is one of the settings this medal was specified for.
Participation recognitionWorks well for participation recognition, where the medal format does what a printed handout cannot.
Executive and board giftingShort lists, individual personalization, and a piece that survives scrutiny.
Internal contests and incentivesA tangible prize outperforms a gift card for exactly the reason you would expect. It stays on the desk.
Service anniversariesFive, ten and twenty years. The object marks the span in a way a announcement never manages.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Employee milestonesAnniversaries, promotions and retirements: the moments where a personalized object does what an email cannot.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Nonprofit & Fundraising
Every pound spent on a donor gift is a pound not spent on the mission, so the gift has to earn it. Recognition pieces for major donors and board members are the clearest win: they are relatively few, they are highly personal, and they materially affect renewal. For event merchandise, price the item to sell rather than to give. An imprint area of 1.5 in x 1.13 in is enough for a logo and a line of text without crowding. At this price the risk is under-ordering, not over-ordering.
2
Sports Leagues, Tournaments & Clubs
Sport needs volume, deadlines and a clear hierarchy of awards. Awards are read as a hierarchy whether or not you intended one. If the participation piece and the champion piece look similar, the champion feels short-changed, and that is remembered longer than the result. Down to $2.76 at volume, which is where this stops being a cost.
3
Education, Schools & Universities
Education buys in waves: orientation, homecoming, graduation, staff appreciation. Student-facing items live rough. They go in backpacks, get left outdoors and are rarely cleaned, so durability matters more than finish. Faculty and donor gifting is the opposite problem and deserves an entirely separate specification. Buy for coverage. The arithmetic rewards it and the budget will not notice.
4
Government, Military & First Responders
This segment is precise about protocol and unforgiving about quality. Challenge coins, unit recognition, retirement and commendation pieces all carry established conventions. Sourcing compliance and documented lead times usually matter as much as the item itself. Minimum order is a single piece, which suits how this segment tends to buy. At $4.45 before breaks it is cheap enough to hand out without counting.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | Free on every order, at any quantity |
| Freight | Free ground freight above $250, and we can split a run across individual addresses |
| Rush service | Rush is quoted per job, with the date confirmed in writing before payment |
| Proofing | Proof back to you next business day, and nothing runs until you approve it |
| Re-orders | Artwork kept on file so re-orders run fast and match |
| Shipping | Free ground freight above $250, and we can split a run across individual addresses |
What do buyers ask about HR905G?
Is there a setup charge?
There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
How should this be cared for?
Wipe with a soft dry cloth. Avoid abrasives, which cut through plating. HR905G measures 2 1/2" and is made of zinc alloy. Die casting captures far finer relief detail than stamping, so medals and heavier emblem pieces are cast rather than pressed.
Can I order more later and have them match?
Re-orders reproduce rather than reinterpret. We keep the approved artwork on file against the item number, so a re-order runs from the same file. On natural materials the base itself can shift a little between batches, so tell us if an exact match matters. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
What does it actually cost at quantity?
Most orders land near 48-95, which prices at $3.56 a piece. The published ladder on HR905G runs from $4.45 a piece at 1-11 down to $2.76 at 500+, about 38% less per piece. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.
Can I get a sample before committing?
Yes: order one piece. HR905G sells from a single unit at $4.45, the first rung of its published ladder, so a sample is simply a normal order. A decorated single piece goes through the same proof as a full run.
What artwork do you need from me?
Send vector if it exists, raster at 300 dpi if it does not, and whatever you have if neither. The personalization area on HR905G is 1.5 in x 1.13 in, and we redraw or re-proportion anything that will not survive it. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
Can I mix colors or sizes to reach a quantity break?
Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on HR905G runs from $4.45 a piece at 1-11 down to $2.76 at 500+, about 38% less per piece.
What is the minimum order for HR905G?
HR905G can be ordered from a single piece. The published ladder on HR905G runs from $4.45 a piece at 1-11 down to $2.76 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on HR905G is 1.5 in x 1.13 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of HR905G decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofMore from this range
Wreath 2" Insert Holder Medal-Antique Silver (Insert Not Included), 2 1/2"
Item HR905S
$2.76 ea at volume, blank
plus $1.00 each to engrave
Wreath 2" Insert Holder Medal-Antique Bronze (Insert Not Included), 2 3/4"
Item HR907B
$3.72 ea at volume, blank
plus $1.75 each to engrave
Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included), 2 3/4"
Item HR907G
$3.72 ea at volume, blank
plus $1.75 each to engrave
Wreath 2" Insert Holder Medal-Antique Silver (Insert Not Included), 2 3/4"
Item HR907S
$3.72 ea at volume, blank
plus $1.75 each to engrave
Wreath 2" Insert Holder Medal-Antique Bronze (Insert Not Included), 2 3/4", Style HR912B
Item HR912B
$3.26 ea at volume, blank
plus $1.75 each to engrave
Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included), 2 3/4", Style HR912G
Item HR912G
$3.26 ea at volume, blank
plus $1.75 each to engrave
Wreath 2" Insert Holder Medal-Antique Silver (Insert Not Included), 2 3/4", Style HR912S
Item HR912S
$3.26 ea at volume, blank
plus $1.75 each to engrave
People also considered
Same decision, different trade-off.
Victory 2" Insert Holder Medal-Antique Bronze (Insert Not Included)
Item HR934B
$2.73 ea at volume, blank
plus $1.75 each to engrave
Victory 2" Insert Holder Medal-Antique Gold (Insert Not Included)
Item HR934G
$2.73 ea at volume, blank
plus $1.75 each to engrave
Victory 2" Insert Holder Medal-Antique Silver (Insert Not Included)
Item HR934S
$2.73 ea at volume, blank
plus $1.75 each to engrave
2" Insert Holder Medal-Bronze/Black (Insert Not Included)
Item HR951B
$2.82 ea at volume, blank
plus $1.75 each to engrave
2" Insert Holder Medal-Gold/Black (Insert Not Included)
Item HR951G
$2.82 ea at volume, blank
plus $1.75 each to engrave
2" Insert Holder Medal-Silver/Black (Insert Not Included)
Item HR951S
$2.82 ea at volume, blank
plus $1.75 each to engrave
Wreath 2" Insert Holder Medal-Antique Gold (Insert Not Included), 2 1/2"Item HR905G · free proof, full refund until you approve
$2.76
What HR905G costs at each quantity
The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.
| Quantity | Piece | Engraving | All-in each | Order total | Ground freight |
|---|---|---|---|---|---|
| 12 | $4.09 | $3.75 | $7.84 | $94.08 | Priced by weight |
| 24 | $3.83 | $2.25 | $6.08 | $145.92 | Priced by weight |
| 48 | $3.56 | $1.75 | $5.31 | $254.88 | Free |
| 96 | $3.29 | $1.25 | $4.54 | $435.84 | Free |
| 250 | $3.03 | $1.00 | $4.03 | $1,007.50 | Free |
| 500 | $2.76 | $1.00 | $3.76 | $1,880.00 | Free |
- Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
- The personalization area is 1.5 in by 1.13 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
- At 50 pieces this costs less than 80% of the 3,730 other priced items in Awards & Recognition.
- The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
- Setup is free at every quantity, including 12.