Free setup · Free digital proof · Free freight over $250
orders@goldstarsupply.com · Mon-Fri 8am-6pm ET
Red Laserable Leatherette Pen
Other options in this range
Leatherette

Red Laserable Leatherette Pen

Item LP464 · 5 5/16" · Desk & Office

Red Laserable Leatherette Pen (item LP464) is in our Pens and Cases range of Desk & Office, with a 3 in x 0.25 in personalization area. At 48 pieces it costs $6.55 each all-in: $4.80 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.

Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of ground transit. It holds if your artwork is with us today and you approve the proof within one business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21. We promise the late end, because a date is worth nothing if we miss it.
$3.72 each at 500+ · $6.00 at 1
QuantityPrice eachYou save
1-11$6.00 -
12-23$5.52 save 8%
24-47$5.16 save 14%
48-95$4.80 save 20%
96-249$4.44 save 26%
250-499$4.08 save 32%
500+$3.72 save 38%
✓ 728 in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)

Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.

See your logo on it

Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 3in x 0.25in.

Or have us spec it →
Included at no extra charge
  • No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
  • Free digital proof before anything is produced
  • Free artwork check at the real imprint size
  • Free ground freight on orders over $250
  • Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and shown in full before you pay, never added afterwards.

What is the Red Laserable Leatherette Pen?

Red Laserable Leatherette Pen (LP464): a pen where Laserable polyurethane leatherette bonded to a contrasting core does most of the work. It measures 5 5/16". This is the red colorway.

Worth knowing before you order: leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges..

Pens circulate: they get borrowed and not returned, which for a promotional item is a feature. This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off. The two together are why this item re-orders.

Treat this as reach inventory. The point of the tier is that you can put one in every hand at an event without the total ever becoming a conversation with finance. Concretely: $6.00 each at 1-11, $3.72 at 500+.

Specifications

Item numberLP464
Product typePen
MaterialLeatherette
Dimensions5 5/16"
Shipping weight1 oz
ColorRed
Decoration methodsLaser Engraving, Debossing, UV Printing
Standard imprint area3 in x 0.25 in
Minimum order1 piece
DurabilityHigh for everyday carry.
CareWipe clean with a damp cloth. Do not soak or machine wash.
CategoryDesk & Office
CollectionPens and Cases

Decoration options

The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 3 in x 0.25 in.

Laser Engraving

A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.

Best for

Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.

Color

Single color: the natural color of the material under the surface.

Debossing

A heated die presses the artwork into the material. A subtle, tactile, recessed impression in the surface color.

Best for

Leather and leatherette gifts where understatement is the point.

Color

Blind (no color) or foil-filled.

UV Printing

UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.

Best for

Multi-color logos, gradients, photographs and exact brand-color matching.

Color

Full color, including white ink on dark substrates.

Artwork requirements

  • Do not spend a week hunting for the perfect file. Send what exists and we will tell you what is usable.
  • Raster artwork should be at least 300 dpi at the finished imprint size, on a transparent or white background.
  • If the logo is only available as a bitmap, we need it at 300 dpi or better at final size, ideally on a transparent background.
  • Type should be converted to curves or outlines, otherwise a missing font silently substitutes on our end.
  • Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
  • Nothing is produced before you approve a proof in writing. That is a hard rule, not a courtesy.

Production schedule

Digital proofSame or next business day
Standard run3 to 5 business days once the proof is signed off
Rush runquoted per job once the proof is signed off, with the date confirmed in writing
Delivery1 to 5 business days on the ground network

Common uses

Conference kitsSpecified regularly for conference kits. The imprint area at 3 in x 0.25 in is sized for exactly that job.
Reception and counter giveawaysA natural fit for reception and counter giveaways, which is one of the settings this pen was specified for.
Direct mailSpecified regularly for direct mail. The imprint area at 3 in x 0.25 in is sized for exactly that job.
Event and conference giftingHanded to qualified conversations rather than to everyone, so the spend goes where the pipeline is.
Sponsorship and partner thanksGiven to the people who funded or enabled the work, in a form they can keep visible.
Customer loyalty tiersA physical marker of status that an account dashboard cannot replicate.
Recruiting and onboardingIncluded in offer packs and first-day kits, where the object is doing culture work from the very first hour.
Client thank-you programsSent after a renewal, a referral or a project close, when the relationship is warm and the gesture will land.

Where this works best

The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.

1

Financial Services, Insurance & Legal

Professional services sell trust, and the gift has to look like the invoice. The gift is often opened in front of colleagues, so it is judged as a signal about the relationship rather than as an object. Understatement is the safe default, and a name engraved properly does more than any material upgrade. Buy for coverage. The arithmetic rewards it and the budget will not notice.

2

Healthcare & Senior Living

Healthcare buyers screen for practicality and hygiene before they screen for design. Easy-clean surfaces, no small detachable parts, and legible large-format personalization all matter. Staff appreciation is a genuine retention lever in this sector, and a good piece of drinkware or desk recognition costs a fraction of replacing a nurse. Minimum order is a single piece, which suits how this segment tends to buy. At $6.00 before breaks it is cheap enough to hand out without counting.

3

Education, Schools & Universities

Education buys in waves: orientation, homecoming, graduation, staff appreciation. Departments buy separately even when the brand is shared, which is how a university ends up with nine versions of its own crest. A single approved item list with locked artwork solves more than any individual purchasing decision will. Pens circulate: they get borrowed and not returned, which for a promotional item is a feature. The unit cost here is low enough that reach matters more than restraint.

4

Franchise & Multi-Location Brands

The hard problem in multi-location branding is consistency, not creativity. Artwork drift is cumulative and invisible until it is severe. A locked file held centrally against each item number, rather than a logo emailed between locations, is what stops forty sites gradually producing forty logos. This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off. Order deep. At this price the waste of a few extra is cheaper than running short.

5

Trade Shows & Conferences

Booth traffic is not the metric: what leaves the hall and stays in use is. Run a two-tier giveaway: a low-cost item for everyone who stops, and a genuinely good piece reserved for qualified conversations. The second tier is what people remember when your follow-up email arrives a week later. The pen format earns its place here on keep-rate rather than headline price. Volume is the point at $6.00; nobody is auditing this line item.

How does ordering and turnaround work?

Minimum order1 piece
SetupNone: setup is built into the price
FreightFree ground freight above $250, and we can split a run across individual addresses
Rush serviceRush is quoted per job, with the date confirmed in writing before payment
ProofingProof back to you next business day, and nothing runs until you approve it
Re-ordersWe keep the approved file, so a re-order reproduces it exactly
ShippingFree ground freight above $250, and we can split a run across individual addresses

What do buyers ask about LP464?

Can I order more later and have them match?

Yes. We keep the approved artwork on file against the item number, so a re-order runs from the same file. Material batches can vary slightly on natural materials, which is worth knowing if color matching across orders is critical. The published ladder on LP464 runs from $6.00 a piece at 1-11 down to $3.72 at 500+, about 38% less per piece.

How long does production take?

Door to door at standard speed: a day for the proof, 3 to 5 business days in production, then 1 to 5 business days in transit. A rush is quoted per job, with the date confirmed in writing before you pay.

How should this be cared for?

Wipe clean with a damp cloth. Do not soak or machine wash. LP464 measures 5 5/16" and is made of leatherette. Leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges.

Can I see a proof before you produce the order?

Yes, and nothing runs until you have signed it off. Read it properly rather than skimming, because the approved proof is the specification we produce against. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.

Can you work to a fixed in-hand date?

Yes. Give us the in-hand date and checkout tells you immediately whether standard production makes it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. A rush is quoted per job, with the date confirmed in writing before you pay.

Do you ship to multiple addresses?

Yes, through a quote. Card checkout ships one order to one address, so for a split run send the address list with a quote request and we confirm the freight for every destination in writing before you pay. The artwork is proofed once and applied across the whole run. Ground freight is free on orders over $250.

What if the artwork does not fit the imprint area?

The personalization area on LP464 is 3 in x 0.25 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.

What is the minimum order for LP464?

LP464 can be ordered from a single piece. The published ladder on LP464 runs from $6.00 a piece at 1-11 down to $3.72 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on LP464 is 3 in x 0.25 in.

See it with your logo first

Send us your artwork and we will produce a free digital proof of LP464 decorated with your mark. Usually within one business day, with no obligation and no account required.

Get a free proof

More from this range

People also considered

Same decision, different trade-off.

Red Laserable Leatherette PenItem LP464 · free proof, full refund until you approve
$3.72

What LP464 costs at each quantity

The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.

QuantityPieceEngraving All-in eachOrder totalGround freight
12 $5.52 $3.75 $9.27 $111.24 Priced by weight
24 $5.16 $2.25 $7.41 $177.84 Priced by weight
48 $4.80 $1.75 $6.55 $314.40 Free
96 $4.44 $1.25 $5.69 $546.24 Free
250 $4.08 $1.00 $5.08 $1,270.00 Free
500 $3.72 $1.00 $4.72 $2,360.00 Free
  • Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
  • The personalization area is 3 in by 0.25 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
  • At 50 pieces this costs less than 93% of the 541 other priced items in Desk & Office.
  • The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
  • Setup is free at every quantity, including 12.