9 1/4" Collapsible Metal Straw, Case, and Cleaning Brush
Item PCSTRAW2
$11.16 ea at volume, blank
plus $8.50 each to engrave
Straw Cleaning Brush
Straw Cleaning Brush (item PCBRUSH1) is in our Straws range of Drinkware Accessories, with a 5 in x 4.38 in personalization area. The piece is $1.60 at 1-11 and $0.99 at 500+; engraving is priced on your artwork. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.
Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of
ground transit. It holds if your artwork is with us today and you approve the proof within one
business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21.
We promise the late end, because a date is worth nothing if we miss it.
$0.99
each at 500+ · $1.60 at 1
| Quantity | Price each | You save |
|---|---|---|
| 1-11 | $1.60 | - |
| 12-23 | $1.47 | save 8% |
| 24-47 | $1.38 | save 14% |
| 48-95 | $1.28 | save 20% |
| 96-249 | $1.18 | save 26% |
| 250-499 | $1.09 | save 32% |
| 500+ | $0.99 | save 38% |
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)
Sold loose or by the case of 12. Ask us if you want a full case: we will check the case price for you.
See your logo on it
Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 5in x 4.38in.
engraving area
Confirming saves this exact layout as your approved proof, so nothing is engraved that you have not seen.
Included at no extra charge
- No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
- Free digital proof before anything is produced
- Free artwork check at the real imprint size
- Free ground freight on orders over $250
- Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and
shown in full before you pay, never added afterwards.
What is the Straw Cleaning Brush?
Catalogued as PCBRUSH1, this straw set sits in the part of the range that gets re-ordered rather than tried once. It measures 8 3/4".
Built to survive real use rather than a single event, that is what separates a promotional item that keeps working from one that ends up in a drawer..
Reusable straws are a low-cost add-on that upgrades a drinkware gift into a set. Decoration method is matched to the substrate so the mark is permanent rather than printed on top.
Treat this as reach inventory. The point of the tier is that you can put one in every hand at an event without the total ever becoming a conversation with finance. Concretely: $1.60 each at 1-11, $0.99 at 500+.
Specifications
| Item number | PCBRUSH1 |
|---|---|
| Product type | Straw |
| Material | See description |
| Dimensions | 8 3/4" |
| Shipping weight | 0 oz |
| Color | Silver |
| Decoration methods | Laser Engraving, UV Printing |
| Standard imprint area | 5 in x 4.38 in |
| Minimum order | 1 piece |
| Durability | High. |
| Care | Wipe clean with a soft damp cloth. |
| Category | Drinkware Accessories |
| Collection | Straws |
Decoration options
The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 5 in x 4.38 in.
Laser Engraving
A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.
Best for
Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.
Color
Single color: the natural color of the material under the surface.
UV Printing
UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.
Best for
Multi-color logos, gradients, photographs and exact brand-color matching.
Color
Full color, including white ink on dark substrates.
Artwork requirements
- Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
- Outline your fonts before sending. It removes the most common cause of a proof coming back wrong.
- Convert all type to outlines so fonts do not substitute in production.
- Send the file you have, even if it is imperfect. We will tell you honestly whether it will hold up and redraw it if it will not.
- Supply Pantone (PMS) references for any color that has to match exactly.
Production schedule
| Artwork proof | 1 business day from receipt of usable art |
|---|---|
| Standard production | 3 to 5 business days after proof approval |
| Rush production | quoted per job, with the date confirmed in writing before you pay |
| Ground transit | 1 to 5 business days depending on destination |
Common uses
Sustainability programsBuilt for sustainability programs. That is the use case the format was designed around, not one retrofitted to it.
Add-on giftingWorks well for add-on gifting, where the straw set format does what a printed handout cannot.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Client thank-you programsSent after a renewal, a referral or a project close, when the relationship is warm and the gesture will land.
Sponsorship and partner thanksGiven to the people who funded or enabled the work, in a form they can keep visible.
Community and civic eventsLocal sponsorships and volunteer thanks, where visible presence matters more than volume.
Fundraising and donor recognitionThanking the people who gave, in a form that quietly encourages the next person to.
Where this works best
The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.
1
Weddings, Reunions & Milestone Events
Personal events are the one segment where the recipient genuinely wants the item personalized. Guests keep what they can use and discard what merely commemorates. An item that works on an ordinary Tuesday will outlive the event by years; one that only makes sense on the day will not survive the drive home. Cost per impression is the number that matters here, and it is very low.
2
Corporate Gifting & Client Appreciation
Client gifting has one job: to be kept. A gift that lands on a client desk and stays there keeps working long after the meeting that prompted it. That argues for fewer, better pieces rather than a large volume of disposables, and for decoration that will still look intentional in two years. Cheap enough to over-order slightly, which is the right call for a table.
3
Hospitality, Restaurants & Breweries
In hospitality the promotional item and the retail item are the same object. Breakage and theft are line items, not accidents. Popular branded glassware walks out of a venue at a predictable rate, and the sensible response is to price it for retail rather than to fight it. Minimum order is a single piece, which suits how this segment tends to buy. At this price the risk is under-ordering, not over-ordering.
How does ordering and turnaround work?
| Minimum order | 1 piece |
|---|---|
| Setup | None: setup is built into the price |
| Freight | Free ground freight on every order over $250; split shipping to individual addresses available |
| Rush service | Working to a date? Ask and we will confirm what is genuinely possible, priced up front |
| Proofing | One business day to proof, then production starts the moment you sign off |
| Re-orders | We keep the approved file, so a re-order reproduces it exactly |
| Shipping | Free ground freight on every order over $250; split shipping to individual addresses available |
What do buyers ask about PCBRUSH1?
Can I order more later and have them match?
Re-orders reproduce rather than reinterpret. We keep the approved artwork on file against the item number, so a re-order runs from the same file. On natural materials the base itself can shift a little between batches, so tell us if an exact match matters. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
How is this decorated?
We run laser engraving on PCBRUSH1 as standard. A permanent, high-contrast, single-color mark with no ink involved. We can also run UV Printing on this item if the artwork calls for it. The personalization area on PCBRUSH1 is 5 in x 4.38 in. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.
Do you keep this item in stock?
Yes. The warehouse shows more than 1,000 of PCBRUSH1 in stock as of the last hourly sync. If a color is short we say so the day you order rather than the week before the deadline. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.
Can I mix colors or sizes to reach a quantity break?
Yes, provided the artwork stays the same across the run. Different artwork is fine as well: it gets its own proof, and setup stays free. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The published ladder on PCBRUSH1 runs from $1.60 a piece at 1-11 down to $0.99 at 500+, about 38% less per piece.
What if the artwork does not fit the imprint area?
The personalization area on PCBRUSH1 is 5 in x 4.38 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.
What happens if something arrives damaged?
We replace damaged pieces. Send a photograph and the item number within 10 days of delivery and we handle the carrier claim ourselves. If the box arrives visibly damaged, write that on the freight bill before signing. The replacement runs from the artwork you already approved, so it matches the rest of the order.
Is there a setup charge?
There is no setup charge, ever. Art preparation, machine setup and the proof are part of the price on this page. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.
What is the minimum order for PCBRUSH1?
PCBRUSH1 can be ordered from a single piece. The published ladder on PCBRUSH1 runs from $1.60 a piece at 1-11 down to $0.99 at 500+, about 38% less per piece. There is no setup fee at any quantity. The personalization area on PCBRUSH1 is 5 in x 4.38 in.
See it with your logo first
Send us your artwork and we will produce a free digital proof of PCBRUSH1 decorated with your mark. Usually within one business day, with no obligation and no account required.
Get a free proofPeople also considered
Same decision, different trade-off.
Straw Cleaning BrushItem PCBRUSH1 · free proof, full refund until you approve
$0.99