Free setup · Free digital proof · Free freight over $250
orders@goldstarsupply.com · Mon-Fri 8am-6pm ET
Teal Laserable Leatherette Pen
Other options in this range
Leatherette

Teal Laserable Leatherette Pen

Item LP461 · 5 5/16 · Desk & Office

Teal Laserable Leatherette Pen (item LP461) is in our Pens and Cases range of Desk & Office, with a 3 in x 0.25 in personalization area. At 48 pieces it costs $6.55 each all-in: $4.80 for the piece plus $1.75 to engrave, setup included. It can be ordered from a single piece. Production is 3 to 5 business days after you approve a free digital proof.

Order today, in hand by
Counted from today, allowing a day for your proof and 5 days of ground transit. It holds if your artwork is with us today and you approve the proof within one business day. Checkout will not accept a date we cannot keep, and it names this one.
Often sooner: the fast end of that window is Wed, Oct 21. We promise the late end, because a date is worth nothing if we miss it.
$3.72 each at 500+ · $6.00 at 1
QuantityPrice eachYou save
1-11$6.00 -
12-23$5.52 save 8%
24-47$5.16 save 14%
48-95$4.80 save 20%
96-249$4.44 save 26%
250-499$4.08 save 32%
500+$3.72 save 38%
✓ 1,000+ in stock
Estimated delivery Wed, Oct 21 - Mon, Nov 2 (order today, artwork approved within a day)

Sold loose or by the case of 25. Ask us if you want a full case: we will check the case price for you.

See your logo on it

Drop your logo on, drag it where you want it and size it. You will see exactly what we engrave, and what it costs, before you pay. The personalization area on this item is 3in x 0.25in.

Or have us spec it →
Included at no extra charge
  • No setup fee, at any quantity (most promo sites charge $40 to $63 per design)
  • Free digital proof before anything is produced
  • Free artwork check at the real imprint size
  • Free ground freight on orders over $250
  • Artwork kept on file for fast, matching re-orders
No proof fees, no art fees, no small-order fees. Engraving is priced on its own line and shown in full before you pay, never added afterwards.

What is the Teal Laserable Leatherette Pen?

A leatherette pen, catalogued here as LP461. The substrate was picked for decoration quality first and appearance second, which is the right order. It measures 5 5/16. This is the teal colorway.

In practice: leatherette solves the two problems real leather has as a promotional substrate: it is consistent from unit to unit, so a hundred pieces look like a hundred of the same piece, and it does not absorb moisture, stain, or fray at cut edges..

This is one of the highest-contrast decoration surfaces in the industry. The laser removes the top layer and reveals the core color underneath, so the logo appears as a crisp, permanent, two-tone mark with no ink and nothing to wear off. Pens circulate: they get borrowed and not returned, which for a promotional item is a feature.

This is table-stock: priced to be handed out freely. The metric that matters is how many you can put into circulation, not what each one felt like to give. Concretely: $6.00 each at 1-11, $3.72 at 500+.

Specifications

Item numberLP461
Product typePen
MaterialLeatherette
Dimensions5 5/16
Shipping weight1 oz
ColorTeal
Decoration methodsLaser Engraving, Debossing, UV Printing
Standard imprint area3 in x 0.25 in
Minimum order1 piece
DurabilityHigh for everyday carry.
CareWipe clean with a damp cloth. Do not soak or machine wash.
CategoryDesk & Office
CollectionPens and Cases

Decoration options

The decoration method is chosen to match the substrate, which is why the mark is permanent rather than printed on top of it. Standard imprint area on this item is 3 in x 0.25 in.

Laser Engraving

A focused laser removes the surface layer to expose the substrate beneath. A permanent, high-contrast, single-color mark with no ink involved.

Best for

Logos, names, dates and fine text. The default choice when the mark has to outlive the campaign.

Color

Single color: the natural color of the material under the surface.

Debossing

A heated die presses the artwork into the material. A subtle, tactile, recessed impression in the surface color.

Best for

Leather and leatherette gifts where understatement is the point.

Color

Blind (no color) or foil-filled.

UV Printing

UV-cured ink is jetted directly onto the product and cured instantly under ultraviolet light. Full-color, photographic-quality artwork with hard edges and no dot gain.

Best for

Multi-color logos, gradients, photographs and exact brand-color matching.

Color

Full color, including white ink on dark substrates.

Artwork requirements

  • Vector artwork (.ai, .eps, .pdf or .svg) reproduces best at every size and is what we ask for first.
  • Vector files are the safe option. They hold their edges whether the mark runs at an inch or a foot.
  • Artwork we redraw stays on file under your item number, so the next order runs from the same corrected file.
  • Name the PMS values for anything that has to match a brand standard; screen color is not a reliable reference.
  • A 300 dpi raster at the actual imprint dimensions will run cleanly. Anything pulled from a web page usually will not.

Production schedule

Digital proofSame or next business day
Standard run3 to 5 business days once the proof is signed off
Rush runquoted per job once the proof is signed off, with the date confirmed in writing
Delivery1 to 5 business days on the ground network

Common uses

Conference kitsA natural fit for conference kits, which is one of the settings this pen was specified for.
Reception and counter giveawaysBuilt for reception and counter giveaways. That is the use case the format was designed around, not one retrofitted to it.
Direct mailSpecified regularly for direct mail. The imprint area at 3 in x 0.25 in is sized for exactly that job.
Renewal and retention giftsTimed to the contract date rather than the calendar, which is when the recipient is actually paying attention.
Booth and trade show handoutsThe item that gives someone a reason to stop walking, and a reason to remember which booth it came from.
Event and conference giftingHanded to qualified conversations rather than to everyone, so the spend goes where the pipeline is.
Customer loyalty tiersA physical marker of status that an account dashboard cannot replicate.
Sponsorship and partner thanksGiven to the people who funded or enabled the work, in a form they can keep visible.

Where this works best

The same item lands differently depending on who gets it and why. Here is how this one performs across the programs it sells into most.

1

Financial Services, Insurance & Legal

Professional services sell trust, and the gift has to look like the invoice. The gift is often opened in front of colleagues, so it is judged as a signal about the relationship rather than as an object. Understatement is the safe default, and a name engraved properly does more than any material upgrade. An imprint area of 3 in x 0.25 in is enough for a logo and a line of text without crowding. At this price the risk is under-ordering, not over-ordering.

2

Healthcare & Senior Living

Healthcare buyers screen for practicality and hygiene before they screen for design. Easy-clean surfaces, no small detachable parts, and legible large-format personalization all matter. Staff appreciation is a genuine retention lever in this sector, and a good piece of drinkware or desk recognition costs a fraction of replacing a nurse. Down to $3.72 at volume, which is where this stops being a cost.

3

Education, Schools & Universities

Education buys in waves: orientation, homecoming, graduation, staff appreciation. Departments buy separately even when the brand is shared, which is how a university ends up with nine versions of its own crest. A single approved item list with locked artwork solves more than any individual purchasing decision will. Buy for coverage. The arithmetic rewards it and the budget will not notice.

4

Franchise & Multi-Location Brands

The hard problem in multi-location branding is consistency, not creativity. Artwork drift is cumulative and invisible until it is severe. A locked file held centrally against each item number, rather than a logo emailed between locations, is what stops forty sites gradually producing forty logos. Minimum order is a single piece, which suits how this segment tends to buy. At $6.00 before breaks it is cheap enough to hand out without counting.

5

Trade Shows & Conferences

Booth traffic is not the metric: what leaves the hall and stays in use is. Run a two-tier giveaway: a low-cost item for everyone who stops, and a genuinely good piece reserved for qualified conversations. The second tier is what people remember when your follow-up email arrives a week later. Pens circulate: they get borrowed and not returned, which for a promotional item is a feature. The unit cost here is low enough that reach matters more than restraint.

How does ordering and turnaround work?

Minimum order1 piece
SetupNone: setup is built into the price
FreightOrders over $250 ship free by ground; individual address splits available on request
Rush serviceRush is quoted per job, with the date confirmed in writing before payment
ProofingOne business day to proof, then production starts the moment you sign off
Re-ordersRe-orders run from the file you already approved
ShippingOrders over $250 ship free by ground; individual address splits available on request

What do buyers ask about LP461?

What if the artwork does not fit the imprint area?

The personalization area on LP461 is 3 in x 0.25 in. If your mark does not sit well in that shape we redraw or re-proportion it and show you the result on the proof before anything is produced. Engraving is charged on the share of the area your artwork covers, so a smaller mark costs less.

What artwork do you need from me?

Vector artwork is ideal (.ai, .eps, .pdf or .svg) with all type converted to outlines. High-resolution raster at 300 dpi or better also works, and a logo saved from a website is worth sending anyway. We check it against the 3 in x 0.25 in personalization area and tell you before you pay whether it holds up at that size.

Can you work to a fixed in-hand date?

Yes, and it is the right way to brief us. Tell us the date the box has to be open rather than the date you want it shipped, and checkout works the schedule backwards from there. It refuses a date it cannot keep rather than accepting it and missing it. Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit.

How long does production take?

Standard production is 3 to 5 business days after proof approval, then 1 to 5 business days of ground transit. The clock starts when you approve the proof, not when you place the order. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing. A rush is quoted per job, with the date confirmed in writing before you pay.

What does it actually cost at quantity?

The published ladder on LP461 runs from $6.00 a piece at 1-11 down to $3.72 at 500+, about 38% less per piece. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout. Ground freight is free on orders over $250.

How is this decorated?

We run laser engraving on LP461 as standard. A permanent, high-contrast, single-color mark with no ink involved. We can also run Debossing and UV Printing on this item if the artwork calls for it. The personalization area on LP461 is 3 in x 0.25 in. A free digital proof comes back within one business day of usable artwork, and nothing is produced until you approve it in writing.

Is there a setup charge?

No. Setup is free on every order at every quantity. Art preparation, machine setup and your digital proof are built into the price, with nothing added for them later. Engraving is a separate line, shown per quantity in the cost table on this page, so the all-in figure is visible before checkout.

What is the minimum order for LP461?

There is no minimum beyond one piece on LP461. Price breaks on this item fall at 1-11, 12-23, 24-47, 48-95, 96-249, 250-499, 500+. The price per piece only goes down as the quantity rises. The published ladder on LP461 runs from $6.00 a piece at 1-11 down to $3.72 at 500+, about 38% less per piece.

See it with your logo first

Send us your artwork and we will produce a free digital proof of LP461 decorated with your mark. Usually within one business day, with no obligation and no account required.

Get a free proof

More from this range

People also considered

Same decision, different trade-off.

Teal Laserable Leatherette PenItem LP461 · free proof, full refund until you approve
$3.72

What LP461 costs at each quantity

The piece, the engraving and the freight, worked out at every break on this item's own ladder. Most suppliers publish the piece price and leave you to find out the rest at checkout.

QuantityPieceEngraving All-in eachOrder totalGround freight
12 $5.52 $3.75 $9.27 $111.24 Priced by weight
24 $5.16 $2.25 $7.41 $177.84 Priced by weight
48 $4.80 $1.75 $6.55 $314.40 Free
96 $4.44 $1.25 $5.69 $546.24 Free
250 $4.08 $1.00 $5.08 $1,270.00 Free
500 $3.72 $1.00 $4.72 $2,360.00 Free
  • Ground freight is free from 48 pieces, which is where this order passes $250.00 of merchandise.
  • The personalization area is 3 in by 0.25 in. Engraving is charged on the share your artwork actually covers, so a smaller logo costs less. Place yours on the product above and the price updates as you size it.
  • At 50 pieces this costs less than 93% of the 541 other priced items in Desk & Office.
  • The table starts at 12 because below that the engraving setup costs more than the goods, and we will not guess at a price there. Ask us and we will quote a smaller run from your artwork.
  • Setup is free at every quantity, including 12.